LSM80BXHSNAHTPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514485266
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514485266 is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | 8Dn9436Q6D |
| Color | Black |
| Dimension J-1 | 100 mm3.94 in |
| Dimension J-2 | 80 mm3.15 in |
| Dimension K | 30 mm1.18 in |
| Dimension L | 115 mm4.53 in |
| Dimension O | Series 10.5 mm0.41 in |
| Dimension P | Series 8.5 mm0.Series 33 in |
| Dimension Series G | 7 mm0.24 in |
| Dimension Series M | 30 mm |
| Dimension T | Series 10.5 mm |
| Distance at Series 20° Angle of Pretension (Normal Force Level) (Dimension S) | 34 mm1.3 in |
| Element Material | Natural Rubber |
| Force at Series 20° Angle of Pretension (Normal Force Level) (Dimension F) | 180 N40.5 lb |
| Mounting Bolt Size | M10 x 30 |
| Mounting Bolt Torque | 49 N·m434 in·lb |
| Normal Temperature Range | -40 to 80 oF |
| Notes | The recommended angle of pretension is Series 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.Mounting accessories into the "Hard" Position results in approximately 25% higher tensioning force over the "normal" position.Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets). |
| Outside Diameter (Dim D) | 58 mm2.28 in |
| Overall Length (Dim E) | 79 mm3.11 in |
| Style | Elastomeric |
| Tensioner | RT18-Series M |
| Type | Chain/Belt Tensioner |
| UPC Number | 85266 |
BA607430ANDGEDimensions on request
69790498500
📏 Dimensions on request
239/670YMBW509C08C3
📏 Dimensions on request
LSM140BRHSNRSS
📏 Dimensions on request
LSM180BRHSDQAKPS
📏 Dimensions on request
68514442303
📏 Dimensions on request
LSM115BXHSNQA
📏 Dimensions on request
LSM140BRHTTKPS
📏 Dimensions on request
68514442218
📏 Dimensions on request
6309-2RZ-C3
📏 Dimensions on request
LSM200BXHSDHTPS
📏 Dimensions on request
10X28X7-R2LS32-S
📏 Dimensions on request