68514411342
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514485263
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514485263 is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | HeguxV8X9f |
| Color | Black |
| Dimension J-1 | 250 mm9.84 in |
| Dimension J-2 | 200 mm7.87 in |
| Dimension K | 80 mm3.15 in |
| Dimension L | 290 mm11.42 in |
| Dimension O | Series 20 mm0.79 in |
| Dimension P | 17 mm0.67 in |
| Dimension Series G | Series 20 mm0.79 in |
| Dimension Series M | Series 60 mm |
| Dimension T | 20.5 mm |
| Distance at Series 20° Angle of Pretension (Normal Force Level) (Dimension S) | 86 mm3.4 in |
| Element Material | Natural Rubber |
| Force at Series 20° Angle of Pretension (Normal Force Level) (Dimension F) | 2150 N483.3 lb |
| Mounting Bolt Size | M24 x Series 60 |
| Mounting Bolt Torque | 750 N·m6638 in·lb |
| Normal Temperature Range | -40 to 80 oF |
| Notes | The recommended angle of pretension is Series 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.Mounting accessories into the "Hard" Position results in approximately 25% higher tensioning force over the "normal" position.Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets). |
| Outside Diameter (Dim D) | 130 mm5.120 in |
| Overall Length (Dim E) | 210 mmSeries 8.270 in |
| Style | Elastomeric |
| Tensioner | RT N50-Series M |
| Type | Chain/Belt Tensioner |
| UPC Number | 85263 |
LSE304BXHSAFQBRSS
📏 Dimensions on request
MSM50BXHFATL
📏 Dimensions on request
HYDNUT510.SEAL
📏 Dimensions on request
68514421888
📏 Dimensions on request
LSM125BXHSNKPS
📏 Dimensions on request
LFS52-EE
📏 Dimensions on request
EE291250 - 291749
📏 Dimensions on request
MSM85BRHTT
📏 Dimensions on request
45291 - 45220
📏 Dimensions on request
GN315KRRB
📏 Dimensions on request