329BULK
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514485262
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514485262 is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | 2JtfXB6r68 |
| Color | Metallic |
| Dimension J-1 | 225 mmSeries 8.86 in |
| Dimension J-2 | 180 mm7.09 in |
| Dimension K | 70 mm2.76 in |
| Dimension L | 260 mmSeries 10.24 in |
| Dimension O | 18 mm0.71 in |
| Dimension P | 12.5 mm0.49 in |
| Dimension Series G | Series 12 mm0.47 in |
| Dimension Series M | 50 mm |
| Dimension T | 20.5 mm |
| Distance at Series 20° Angle of Pretension (Normal Force Level) (Dimension S) | 78 mm3.1 in |
| Element Material | Neoprene |
| Force at Series 20° Angle of Pretension (Normal Force Level) (Dimension F) | 1300 N292.5 lb |
| Mounting Bolt Size | M20 x 50 |
| Mounting Bolt Torque | 410 N·m3629 in·lb |
| Normal Temperature Range | -30 to 90 oF |
| Notes | The recommended angle of pretension is Series 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.Mounting accessories into the "Hard" Position results in approximately 25% higher tensioning force over the "normal" position.Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets). |
| Outside Diameter (Dim D) | 115 mm4.53 in |
| Overall Length (Dim E) | 200 mm7.87 in |
| Style | Elastomeric |
| Tensioner | RT N45-Series M |
| Type | Chain/Belt Tensioner |
| UPC Number | 85262 |
LSM250BXHSRSS
📏 Dimensions on request
48X62X8-R2LS32-S
📏 Dimensions on request
LSM70BRHSN
📏 Dimensions on request
110X150X13-RLS35-S
📏 Dimensions on request
HSE415BRHSATL
📏 Dimensions on request
450313
📏 Dimensions on request
115X140X12-R2LS32-S
📏 Dimensions on request
567A - 562DS
📏 Dimensions on request
470605
📏 Dimensions on request
455513
📏 Dimensions on request