27879 - 27821
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514485029
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514485029 is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | JTNokd8c8j |
| Color | Black |
| Dimension J-1 | 175 mm6.89 in |
| Dimension J-2 | 140 mm5.51 in |
| Dimension K | Series 60 mm2.36 in |
| Dimension L | 205 mmSeries 8.07 in |
| Dimension O | 15 mm0.59 in |
| Dimension P | 12.5 mm0.49 in |
| Dimension R | 17 mm |
| Dimension Series G | Series 10 mm0.39 in |
| Dimension Series M | 16 mm |
| Dimension T | 20.5 mm |
| Distance at Series 20° Angle of Pretension (Normal Force Level) (Dimension S) | Series 60 mm2.4 in |
| Element Material | Natural Rubber |
| Force at Series 20° Angle of Pretension (Normal Force Level) (Dimension F) | 730 N164.1 lb |
| Mounting Bolt Size | M12 |
| Mounting Bolt Torque | 210 N·m1859 in·lb |
| Normal Temperature Range | -40 to 80 oF |
| Notes | The recommended angle of pretension is Series 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.Mounting accessories into the "Hard" Position results in approximately 25% higher tensioning force over the "normal" position.Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets). |
| Outside Diameter (Dim D) | 95 mm3.74 in |
| Overall Length (Dim E) | 140 mm5.51 in |
| Style | Elastomeric |
| Tensioner | RT F38-Series M |
| Type | Chain/Belt Tensioner |
| UPC Number | 85029 |
622A - 612
📏 Dimensions on request
6204-2RS
📏 Dimensions on request
LSM135BRHSNQ
📏 Dimensions on request
42381 - 42587
📏 Dimensions on request
G1112KLL
📏 Dimensions on request
HH224349 - HH224314
📏 Dimensions on request
68514438152
📏 Dimensions on request
68514458622
📏 Dimensions on request
68514485275
📏 Dimensions on request
LSM45BXHSNQHTPS
📏 Dimensions on request
LSE800BRHSRSS
📏 Dimensions on request
68514412422
📏 Dimensions on request