68514431057
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514477175
Custom & Special Bearings · Dimensions on request
0.33 ozWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
Reply ≤ 30 min
The TIMKEN 68514477175 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.33 oz. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.33 oz |
| Catalogue Ref. | rcn6WY8d8k |
| Angular Misalignment | 2.00 o |
| Application | Motion Control |
| Axial Misalignment | ± 0.024 in |
| Bore A | 0.625 in |
| Bore B | 0.625 in |
| Bore Type | Finished Bore |
| Clamp Screw Size | M5 |
| Coupling Size | MDS50C |
| Cubic inches | 7.93614 in3 |
| Dimension HD | 39.00 mm1.535 in |
| Disc Material | Stainless Steel |
| Features | Zero backlash design High torsional stiffness Aluminum hubs with stainless steel discs Moderate-high torque capabilities Low Inertia |
| Hub Material | Aluminum |
| Keyway Size | No Keyway |
| Length thru Bore | 19.40 mm0.7Series 64 in |
| Max. Bore (Dimensions ID1/ID2) | 20.00 mm0.787 in |
| Max. Operating Temperature | 300.00 oF |
| Min. Bore (Dimensions ID1/ID2) | 12 mm0.472 in |
| Moment of Inertia | 0.1570 lb·in2 |
| Nominal Torque | 66.00 in·lb |
| Notes | Nominal torque, torsional stiffness, weight and moment of inertia are based on minimum bore size. Various hub diameters available to accommodate different size bore diameters. |
| Outside Diameter | 50.00 mm1.969 in |
| Overall Length | 52.00 mm2.047 in |
| Parallel Misalignment | 0.007 in |
| Style | Clamp Screw |
| Torsional Stiffness | 17700.00 in·lb/rad |
| Type | Mini Disc Coupling |
| Weight (Complete Coupling w/ Min. Bores) | 5.29 oz |
LSE411BRHS
📏 Dimensions on request
HYDNUT360-INCH.SEAL
📏 Dimensions on request
MSE708BRHSATL
📏 Dimensions on request
25580 - 25518
📏 Dimensions on request
SNT 520-617 - 23220K - LO520
📏 Dimensions on request
MSM270BXHFKPS
📏 Dimensions on request
LSE611BRHS
📏 Dimensions on request
69790405210
📏 Dimensions on request
TKVD25-W-U
📏 Dimensions on request
Y32306
📏 Dimensions on request