69790498510
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514476419
Custom & Special Bearings · Dimensions on request
0.22 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514476419 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.22 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.22 lb |
| Catalogue Ref. | hIetsvajaU |
| # of Set Screws Required per Hub | 1 |
| Axial Misalignment (∆ Ka) | 0.51 mm0.020 in |
| Bore Size | 1/4 x 3/8 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 1.52358 in3 |
| Dimension HD | 21.84 mm0.860 in |
| Hub Size | U37S |
| Hub Style | Short |
| Keyway Size (W x D) | 1/16 x 1/32 & Puller Hole in |
| Length thru Bore | 13.21 mm0.520 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 9.53 mm0.375 in |
| Max. Parallel Misalignment | 0.36 mm0.014 in |
| Max. Speed | 30000.00 rpm |
| Max. Torque | 39.00 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 6.35 mm0.250 in |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. OAL Tolerance: + 1/8 inch. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 52.32 mm2.060 in |
| Rated HP at 100 rpm | 0.06 hp |
| Set Screw Thread Size (Dimension T) | 10-24 & Puller Hole |
| Type | Shaft-to-Shaft |
| Wind-Up Angle at Max. Torque | 4.5 o |
| Wind-Up Angle at Nominal Torque | 1.78 o |
68514448630
📏 Dimensions on request
LSE415BXHSAFQ
📏 Dimensions on request
69790498240
📏 Dimensions on request
LSE404BRHSKPS
📏 Dimensions on request
MSM160BXHSRSS
📏 Dimensions on request
68514453009
📏 Dimensions on request
LSE800BXHSAFQRSS
📏 Dimensions on request
25877 - 25821
📏 Dimensions on request
HSM230BRHS
📏 Dimensions on request
68514436094
📏 Dimensions on request
69790498169
📏 Dimensions on request
6309-ZZ-C3
📏 Dimensions on request