Name: TIMKEN 68514476399
Brand: TIMKEN
SKU: Eyf0VV564t

TIMKEN 68514476399

Custom & Special Bearings · Dimensions on request

3.90 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514476399 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 3.90 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

3.90 lb

Catalogue Ref.

Eyf0VV564t

Angular Displacement

0.070 in

Bushing Series

999999999

Color

Gray

Coupling Size

Coupling Type

Jaw

Cubic inches

17.14393 in3

Dimension G

25.91 mm1.020 in

Dimension HD

74.93 mm2.950 in

Dimension U

39.88 mm1.570 in

Distance between Spider and Hub Face (Dimension CL)

3.05 mm0.120 in

Hub Material

Cast Iron

Hub Style

Keyway Size

6 x 2.8 mm

Max Torque (with 92 Shore A spider)

530.00 N·m4690.00 in·lb

Max. Angular Displacement (∆ Ka), n=1500 [1/min]

1 o

Max. Axial Displacement (∆ Ka)

0.0790 in

Max. Bore (Dimensions ID1/ID2)

42 mm1.650 in

Max. Radial Displacement (∆ Kr)

0.0120 in

Max. Speed

6000 rpm

Max. Temperature Range (with 80 Shore A, 92 Shore A, and 95/98 Shore A spiders)

-50 to 248 oF

Min. Bore (Dimensions ID1/ID2)

12 mm0.470 in

Nominal Torque (with 92 Shore A spider)

265.00 N·m2345.00 in·lb

Normal Temperature Range (with 80 Shore A, 92 Shore A, and 95/98 Shore A spiders)

-40 to 212 oF

Notes

Maximum bore may be achieved through the use of a shallow keyway.Maximum bore refers to maximum straight bore with keyway allowed in hub.Outside Diameter is equal to Dimension HD for B style aluminum sizes: 19, 24, and 28.S = Solid hub with no boreSpider Outside Diameter (Dimension A) is equal to Outside DiameterThe values regarding displacement are provided assuming normal operating conditions (i.e. temperature, torque with nominal rating of the coupling, speed/RPM rating of the coupling, and misalignment). Careful installation (i.e. alignment) and periodic inspection should be provided to provide the optimum life of the coupling. Special consideration should be given as to the position of the shafts and the amount of axial movement the coupling will be exposed to. The more accurate the alignment of the coupling, will result in greater life of the elastomer. A coupling guard and rotating equipment safety procedures should always be followed. Please consult the Lovejoy web site at www.lovejoy-inc.com for assembly instructions of the curved jaw coupling.

Outside Diameter

95 mm3.74 in

Overall Coupling Length

125.98 mm4.960 in

Set Screw Style Coupling Location Size (Dimension SL)

20.07 mm0.790 in

Set Screw Style Coupling Size (Dimension T)

5/16-18

Spider Inside Diameter

46.00 mm1.810 in

Spider Outside Diameter

95.00 mm3.740 in

Spider Thickness (Dimension W)

20.00 mm0.790 in

Spline Size

999999999

Style

Bored

The Curved Jaw Design

Three piece design that is easy to assembleThe curved jaw design incorporates both radial and axial curvature (crowning) to the elastomer (spider)Hubs are offered in sintered iron, steel, aluminum, cast iron and nodular iron materialsThree different urethane elastomers availableNo metal to metal contact and no lubrication requiredFail safe design due to the jaw in compression design (continues to function after the elastomer fails)The CJ series covers a torque range of 67 to 247,800 in-lbs

Type

Curved Jaw Coupling Hubs

Width

50.04 mm1.970 in