68514412428
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514468125
Custom & Special Bearings · Dimensions on request
1.40 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514468125 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.40 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.40 lb |
| Catalogue Ref. | NoQ8Jy341Y |
| # of Mounting Screws Required | 3 |
| # of Set Screws Required | 1 |
| Bore Size | 3/4 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 18.66240 in3 |
| Dimension BC | 57.15 mm2.250 in |
| Dimension D | 69.85 mm2.750 in |
| Dimension FL | 9.65 mm0.380 in |
| Dimension HD | 43.94 mm1.730 in |
| Flange Diameter (Dimension FD) | 73.15 mm2.880 in |
| Hub Size | UFH87S |
| Hub Style | Short |
| Keyway Size (W x D) | 3/16 x 3/32 in |
| Length thru Bore | 21.34 mm0.840 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 22.00 mm0.875 in |
| Max. Parallel Offset | 0.61 mm0.024 in |
| Max. Recommended End Play | 0.51 mm0.020 in |
| Max. Speed | 10000 rpm |
| Max. Torque | 346 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 11.13 mm0.438 in |
| Mounting Screw Thread Size | 1/4-20 |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.OAL & Dimension FL Tolerance + .12 inch.Mounting screws not supplied. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 57.15 mm2.250 in |
| Pin Location (Dimension SL) | 0.44 in |
| Rated HP at 100 rpm | 0.55 hp |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Type | Flange-to-Shaft |
| Wind-Up Angle at Max. Torque | 3.00 o |
| Wind-Up Angle at Nominal Torque | 1.17 o |
68514425191
📏 Dimensions on request
68514438578
📏 Dimensions on request
LSM40BXHSHTPS
📏 Dimensions on request
MSE800BXHSRSS
📏 Dimensions on request
MSE607BRHSAFQRSS
📏 Dimensions on request
H239649 - H239612CD
📏 Dimensions on request
84527105114
📏 Dimensions on request
MSE715BXHSAFQA
📏 Dimensions on request