TSWWZ16-PD
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514452746
Custom & Special Bearings · Dimensions on request
0.20 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514452746 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.20 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.20 lb |
| Catalogue Ref. | Q1Sbtj9x9Y |
| # of Mounting Screws Required | 1 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 15.00000 in3 |
| Depth | 1.00 in |
| Dimension BC | 111.25 mm4.380 in |
| Dimension D | 127.00 mm5.000 in |
| Dimension FL | 15.75 mm0.620 in |
| Dimension FL1 | 12.70 mm0.500 in |
| Dimension HL | 53.85 mm2.120 in |
| Dimension S | 87.38 mm3.440 in |
| Flange Diameter (Dimension FD) | 136.65 mm5.380 in |
| Height | 3.00 in |
| Material | Steel |
| Max. Angular Offset | 3.00 o |
| Max. Bore (Dimensions ID1/ID2) | 54.00 mm2.125 in |
| Max. Parallel Offset | 1.04 mm0.041 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Torque | 213.50 N·m1890.00 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 19.00 mm0.750 in |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 194.56 mm7.660 in |
| Pin Location (Dimension SL) | 0.820 in |
| Pin Size | 0.375 in |
| Rated HP at 100 rpm | 3.02 hp |
| Set Screw Size | 3/8-16 |
| Size | RRU150 |
| Speed | 3000 rpm |
| Type | Drop-Out |
| Width | 5.00 in |
| Wind-Up Angle at Max. Torque | 0.85 o |
61911-2RS-C3
📏 Dimensions on request
69790498191
📏 Dimensions on request
68514442533
📏 Dimensions on request
LSE503BRHSAFQ
📏 Dimensions on request
68514460263
📏 Dimensions on request
MSE404BRHFHTPS
📏 Dimensions on request
68514480079
📏 Dimensions on request
LSE700BRHSAFQHTPS
📏 Dimensions on request
HSM240BRHSRSS
📏 Dimensions on request
KIT.KWVE20-B-910
📏 Dimensions on request
KIT.KWVE30-B-339
📏 Dimensions on request