HSE507BXHSRSS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514452745
Custom & Special Bearings · Dimensions on request
0.25 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514452745 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.25 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.25 lb |
| Catalogue Ref. | 97a32BbEcA |
| # of Mounting Screws Required | 1 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 15.00000 in3 |
| Depth | 1.00 in |
| Dimension BC | 95.25 mm3.750 in |
| Dimension D | 107.95 mm4.250 in |
| Dimension FL | 12.70 mm0.500 in |
| Dimension FL1 | 12.70 mm0.500 in |
| Dimension HL | 47.75 mm1.880 in |
| Dimension S | 71.37 mm2.810 in |
| Flange Diameter (Dimension FD) | 111.25 mm4.380 in |
| Height | 3.00 in |
| Material | Steel |
| Max. Angular Offset | 3.00 o |
| Max. Bore (Dimensions ID1/ID2) | 48.00 mm1.875 in |
| Max. Parallel Offset | 0.89 mm0.035 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Torque | 142.40 N·m1260.00 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 16.00 mm0.625 in |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 165.86 mm6.530 in |
| Pin Location (Dimension SL) | 0.69 in |
| Pin Size | 0.375 in |
| Rated HP at 100 rpm | 2.02 hp |
| Set Screw Size | 3/8-16 |
| Size | RRU137 |
| Speed | 6000 rpm |
| Type | Drop-Out |
| Width | 5.00 in |
| Wind-Up Angle at Max. Torque | 1.85 o |
LEIS-M6-T-Nut
📏 Dimensions on request
LSE703BRHSAFQHTPS
📏 Dimensions on request
200X240X15-R2LS32-V
📏 Dimensions on request
68514460887
📏 Dimensions on request
6307-Z-C3
📏 Dimensions on request
LSM100BRHSNQ
📏 Dimensions on request
6020-NR-C3
📏 Dimensions on request
HSM600BXHS
📏 Dimensions on request
MSM170BXHSKPS
📏 Dimensions on request
68514463378
📏 Dimensions on request
LSM400BRHSATL
📏 Dimensions on request