69790492071
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514452744
Custom & Special Bearings · Dimensions on request
0.10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514452744 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.10 lb |
| Catalogue Ref. | 8xrOXTbEcA |
| # of Mounting Screws Required | 1 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 15.00000 in3 |
| Depth | 1.00 in |
| Dimension BC | 79.25 mm3.120 in |
| Dimension D | 90.42 mm3.560 in |
| Dimension FL | 12.70 mm0.500 in |
| Dimension FL1 | 12.70 mm0.500 in |
| Dimension HL | 41.15 mm1.620 in |
| Dimension S | 66.55 mm2.620 in |
| Flange Diameter (Dimension FD) | 93.47 mm3.680 in |
| Height | 3.00 in |
| Material | Steel |
| Max. Angular Offset | 4.50 o |
| Max. Bore (Dimensions ID1/ID2) | 41 mm1.625 in |
| Max. Parallel Offset | 1.12 mm0.044 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Torque | 85.30 N·m755.00 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 16.00 mm0.625 in |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 148.34 mm5.840 in |
| Pin Location (Dimension SL) | 0.560 in |
| Pin Size | 0.313 in |
| Rated HP at 100 rpm | 1.21 hp |
| Set Screw Size | 3/8-16 |
| Size | RRU125 |
| Speed | 6000 rpm |
| Type | Drop-Out |
| Width | 5.00 in |
| Wind-Up Angle at Max. Torque | 1.85 o |
69790492505
📏 Dimensions on request
1207N
📏 Dimensions on request
HSE615BXHSATL
📏 Dimensions on request
68514431161
📏 Dimensions on request
LSM200BRHSDQATL
📏 Dimensions on request
MSM300BXHSATL
📏 Dimensions on request
HYDNUT395.SEAL
📏 Dimensions on request
HYDNUT275-HEAVY.SEAL
📏 Dimensions on request
LSE407BRHSAFQATL
📏 Dimensions on request
LSE412BRHFHTPS
📏 Dimensions on request
69790498687
📏 Dimensions on request