LSM170BXHSDRSS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514452743
Custom & Special Bearings · Dimensions on request
0.10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514452743 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.10 lb |
| Catalogue Ref. | 9aNUBz716R |
| # of Mounting Screws Required | 1 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 15.00000 in3 |
| Depth | 1.00 in |
| Dimension BC | 68.07 mm2.680 in |
| Dimension D | 79.25 mm3.120 in |
| Dimension FL | 12.70 mm0.500 in |
| Dimension FL1 | 9.65 mm0.380 in |
| Dimension HL | 35.05 mm1.380 in |
| Dimension S | 55.37 mm2.180 in |
| Flange Diameter (Dimension FD) | 82.55 mm3.250 in |
| Height | 3.00 in |
| Material | Steel |
| Max. Angular Offset | 3.00 o |
| Max. Bore (Dimensions ID1/ID2) | 35.00 mm1.375 in |
| Max. Parallel Offset | 0.76 mm0.030 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Torque | 63.80 N·m565.00 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 11.00 mm0.438 in |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 124.46 mm4.900 in |
| Pin Location (Dimension SL) | 0.44 in |
| Pin Size | 0.313 in |
| Rated HP at 100 rpm | 0.90 hp |
| Set Screw Size | 1/4-20 |
| Size | RRU100 |
| Speed | 6000 rpm |
| Type | Drop-Out |
| Width | 5.00 in |
| Wind-Up Angle at Max. Torque | 1.03 o |
22332KEMBW33W800C4
📏 Dimensions on request
LSM200BRHSDQKPS
📏 Dimensions on request
10X20X6-RLS35-S
📏 Dimensions on request
68514425131
📏 Dimensions on request
HM807049 - HM807011
📏 Dimensions on request
2MVC9312WI
📏 Dimensions on request
SNT 530 - 22230 - LO230
📏 Dimensions on request