MSM280BXHFATL
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514452742
Custom & Special Bearings · Dimensions on request
0.05 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514452742 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.05 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.05 lb |
| Catalogue Ref. | EjbCyb716R |
| # of Mounting Screws Required | 1 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 15.00000 in3 |
| Depth | 1.00 in |
| Dimension BC | 57.15 mm2.250 in |
| Dimension D | 69.85 mm2.750 in |
| Dimension FL1 | 9.65 mm0.380 in |
| Dimension HL | 35.05 mm1.380 in |
| Dimension S | 53.85 mm2.120 in |
| Flange Diameter (Dimension FD) | 73.15 mm2.880 in |
| Height | 3.00 in |
| Material | Steel |
| Max. Angular Offset | 4.50 o |
| Max. Bore (Dimensions ID1/ID2) | 35.00 mm1.375 in |
| Max. Parallel Offset | 0.89 mm0.035 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Torque | 39.10 N·m346.00 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 11.00 mm0.438 in |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 122.94 mm4.840 in |
| Pin Location (Dimension SL) | 0.69 in |
| Pin Size | 0.188 in |
| Rated HP at 100 rpm | 0.55 hp |
| Set Screw Size | 1/4-20 |
| Size | RRU87 |
| Speed | 10000 rpm |
| Type | Drop-Out |
| Width | 5.00 in |
| Wind-Up Angle at Max. Torque | 1.68 o |
69790498290
📏 Dimensions on request
NRB3,5X19,8-G2
📏 Dimensions on request
LSM300BRHSDQRSS
📏 Dimensions on request
68514435745
📏 Dimensions on request
LSE708BRHSRSS
📏 Dimensions on request
68514458080
📏 Dimensions on request
MSM180BXHS
📏 Dimensions on request
68514461112
📏 Dimensions on request
25580 - 25526
📏 Dimensions on request
MSM60BXHS
📏 Dimensions on request
LSM230BRHS
📏 Dimensions on request