HSM220BXHSRSS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514452740
Custom & Special Bearings · Dimensions on request
0.05 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514452740 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.05 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.05 lb |
| Catalogue Ref. | LAeGrN989s |
| # of Mounting Screws Required | 1 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 15.00000 in3 |
| Depth | 1.00 in |
| Dimension BC | 38.10 mm1.500 in |
| Dimension D | 47.75 mm1.880 in |
| Dimension FL1 | 6.35 mm0.250 in |
| Dimension HL | 25.40 mm1.000 in |
| Dimension S | 39.62 mm1.560 in |
| Flange Diameter (Dimension FD) | 50.80 mm2.000 in |
| Height | 3.00 in |
| Material | Steel |
| Max. Angular Offset | 4.50 o |
| Max. Bore (Dimensions ID1/ID2) | 25.00 mm1.000 in |
| Max. Parallel Offset | 0.53 mm0.021 in |
| Max. Recommended End Play | 0.89 mm0.035 in |
| Max. Torque | 9.30 N·m82.00 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 10.00 mm0.375 in |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 89.41 mm3.520 in |
| Pin Location (Dimension SL) | 0.500 in |
| Pin Size | 0.125 in |
| Rated HP at 100 rpm | 0.13 hp |
| Set Screw Size | 1/4-20 |
| Size | RRU50 |
| Speed | 30000.00 rpm |
| Type | Drop-Out |
| Width | 5.00 in |
| Wind-Up Angle at Max. Torque | 1.82 o |
MSM230BXHFHTPS
📏 Dimensions on request
LSM45BRHSNQATL
📏 Dimensions on request
TKSD35-ADK
📏 Dimensions on request
LSM120BXHS
📏 Dimensions on request
TSX55-E
📏 Dimensions on request
68514436363
📏 Dimensions on request
LSM270BRHSATL
📏 Dimensions on request
68514412336
📏 Dimensions on request
68514410252
📏 Dimensions on request
68514438201
📏 Dimensions on request