WZ1/4
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514448922
Custom & Special Bearings · Dimensions on request
10.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514448922 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 10.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 10.00 lb |
| Catalogue Ref. | kwLfwZ4v3K |
| # of Set Screws Required per Hub | 1 |
| Bore Size | 3/4 in |
| Bore Type | Rough Stock Bore |
| Color | Gray/Metallic |
| Coupling | RRU150 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Coupling Type | Drop-Out |
| Cubic inches | 61.36213 in3 |
| Dimension BC | 111.25 mm4.380 in |
| Dimension D | 127.00 mm5.000 in |
| Dimension FL | 15.75 mm0.620 in |
| Dimension FL1 | 12.70 mm0.500 in |
| Dimension HD | 95.25 mm3.75 in |
| Dimension HL | 53.85 mm2.120 in |
| Dimension S | 87.38 mm3.440 in |
| Flange Diameter (Dimension FD) | 136.65 mm5.380 in |
| Hub Style | RRU Hub |
| Keyway Size (W x D) | No Keyway |
| Material | Steel |
| Max. Angular Offset | 3.00 o |
| Max. Bore (Dimensions ID1/ID2) | 53.98 mm2.125 in |
| Max. Parallel Offset | 1.04 mm0.041 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Speed | 3000 rpm |
| Max. Torque | 1890.00 in·lb / 213.5 N·m1890 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 19.05 mm0.750 in |
| Normal Temperature Range | -40 to 240 oF |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 194.56 mm7.660 in |
| Pin Location (Dimension SL) | 0.820 in |
| Pin Size | 3/8 in |
| Rated HP at 100 rpm | 3.02 hp |
| Set Screw Thread Size (Dimension T) | No Setscrew |
| Wind-Up Angle at Max. Torque | 0.85 o |
68514465080
📏 Dimensions on request
MSM130BRHSKPS
📏 Dimensions on request
11X22X7-RLS35-S
📏 Dimensions on request
SNT 517 - 22217K - VR517
📏 Dimensions on request
RAE45RR
📏 Dimensions on request
G1115KLL
📏 Dimensions on request
68514436138
📏 Dimensions on request
10X22X7-R2LS32-S
📏 Dimensions on request
68514454756
📏 Dimensions on request
LSE411BRHSAFQ
📏 Dimensions on request
HSM440BRHSKPS
📏 Dimensions on request
LSM75BRHSNQ
📏 Dimensions on request