KIT.RWU45-E-300
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514446477
Custom & Special Bearings · Dimensions on request
1.20 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514446477 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.20 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.20 lb |
| Catalogue Ref. | MzQIPd4v3K |
| # of Set Screws Required per Hub | 1 |
| Bore Size | 1/2 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling | RRU87 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Coupling Type | Drop-Out |
| Cubic inches | 11.44627 in3 |
| Dimension BC | 57.15 mm2.250 in |
| Dimension D | 69.85 mm2.750 in |
| Dimension FD | 73.15 mm2.880 in |
| Dimension FL1 | 9.65 mm0.380 in |
| Dimension HD | 72.90 mm2.870 in |
| Dimension HL | 35.05 mm1.380 in |
| Dimension S | 53.85 mm2.120 in |
| Hub Style | RRU Hub |
| Keyway Size (W x D) | No Keyway |
| Material | Steel |
| Max. Angular Offset | 4.50 o |
| Max. Bore (Dimensions ID1/ID2) | 34.93 mm1.375 in |
| Max. Parallel Offset | 0.89 mm0.035 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Speed | 10000 rpm |
| Max. Torque | 346.00 in·lb / 346 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 11.13 mm0.438 in |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 122.94 mm4.840 in |
| Pin Location (Dimension SL) | 0.690 in |
| Pin Size | 3/16 in |
| Rated HP at 100 rpm | 0.55 hp |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Wind-Up Angle at Max. Torque | 1.68 o |
MSE503BXHSAFQHTPS
📏 Dimensions on request
LSM260BRHSDQ
📏 Dimensions on request
HSM400BXHSKPS
📏 Dimensions on request
68514476168
📏 Dimensions on request
68514443305
📏 Dimensions on request
HYDNUT375.SEAL
📏 Dimensions on request
HSM400BXHS
📏 Dimensions on request
KIT.RWU25-E-120
📏 Dimensions on request
61905-2RZ-C3
📏 Dimensions on request
68514454883
📏 Dimensions on request