HSM140BXHS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514445397
Custom & Special Bearings · Dimensions on request
4.50 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514445397 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 4.50 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 4.50 lb |
| Catalogue Ref. | yW4WBt2F1s |
| # of Mounting Screws Required | 3 |
| # of Set Screws Required | 1 |
| Bore Size | 1 1/8 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 77.31313 in3 |
| Dimension BC | 95.25 mm3.750 in |
| Dimension D | 107.95 mm4.250 in |
| Dimension FL | 12.70 mm0.500 in |
| Dimension HD | Series 64.52 mm2.54 in |
| Flange Diameter (Dimension FD) | 111.25 mm4.380 in |
| Hub Size | URH137R |
| Hub Style | Regular |
| Keyway Size (W x D) | 1/4 x 1/8 in |
| Length thru Bore | 40.13 mm1.580 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 35.00 mm1.375 in |
| Max. Parallel Offset | 0.89 mm0.035 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Speed | 6000 rpm |
| Max. Torque | 1260 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 15.88 mm0.625 in |
| Mounting Screw Thread Size | 3/8-16 |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.OAL & Dimension FL Tolerance + .12 inch.Mounting screws not supplied. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 102.36 mm4.030 in |
| Pin Location (Dimension SL) | 0.69 in |
| Rated HP at 100 rpm | 2.02 hp |
| Set Screw Thread Size (Dimension T) | 3/8-16 |
| Type | Flange-to-Shaft |
| Wind-Up Angle at Max. Torque | 3.00 o |
| Wind-Up Angle at Nominal Torque | 1.85 o |
XS4FC410-32FYHDimensions on requestK 28×33×14DTNANDGEDimensions on request
KIT.RWU55-E-300
📏 Dimensions on request
6306-2RS-NR
📏 Dimensions on request
68514441171
📏 Dimensions on request
HSM130BRHSKPS
📏 Dimensions on request
LSM45BRHS
📏 Dimensions on request
MSE408BXHSHTPS
📏 Dimensions on request
LSM100BRHSN
📏 Dimensions on request
LM451349A - LM451310CD
📏 Dimensions on request
LSM220BXHFKPS
📏 Dimensions on request
LSE715BRHSAFQHTPS
📏 Dimensions on request
SNT 519-616 - 21316K - VR616
📏 Dimensions on request