HSM115BRHS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514445297
Custom & Special Bearings · Dimensions on request
8.88 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514445297 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 8.88 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 8.88 lb |
| Catalogue Ref. | gKq4MV8W9d |
| Bore Size | 1 1/2 in |
| Color | Metallic/Gray |
| Coupling Size | RRS225 |
| Coupling Type | Jaw |
| Cubic inches | 76.50000 in3 |
| Dimension CD | 142.75 mm5.620 in |
| Dimension CL | 3.05 mm0.120 in |
| Dimension SL | 25.40 mm1.000 in |
| Elastomeric Member | SOX (NBR) Rubber |
| Hub Length | 77.72 mm3.060 in |
| Hub Style | 4 |
| Keyway Size (W x D) | 3/8 x 3/16 in |
| Length thru Bore | 55.37 mm2.180 in |
| Material | Cast Iron |
| Max. Bore (Dimensions ID1/ID2) | 67 mm2.625 in |
| Max. Speed | 3600.00 rpm |
| Min. Bore (Dimensions ID1/ID2) | 19.00 mm0.750 in |
| Notes | RRS inch hubs are standard with two set screws, including those with No Keyway. RRS inch hubs are standard with two set screws and are drilled to accept retaining collar. Collars are supplied with spacers. |
| Outside Diameter | 127.00 mm5.00 in |
| Spider Performance | Nitrile Butadiene (Buna N) Rubber is a flexible elastomer material that is oil resistant, resembles natural rubber in resilience and elasticity and operates effectively in temperature range of -40° to 212° F (-40° to 100° C). Good resistance to oil. Standard elastomer. (Also applies to SXB Cushions.) |
| Thread (Dimension T) | 1/2-13 |
K 80×88×42ZWANDGEDimensions on request
LSE312BRHSAFQHTPS
📏 Dimensions on request
EE130901D - 131400
📏 Dimensions on request
69790499027
📏 Dimensions on request
HSE700BXHSHTPS
📏 Dimensions on request
MSM330BXHS
📏 Dimensions on request
LM522549 - LM522518
📏 Dimensions on request
68514420802
📏 Dimensions on request
68514436168
📏 Dimensions on request
68514436200
📏 Dimensions on request
TKVD20-ADK
📏 Dimensions on request
84527103288
📏 Dimensions on request