68514436205
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514444584
Custom & Special Bearings · Dimensions on request
2.34 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514444584 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 2.34 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 2.34 lb |
| Catalogue Ref. | p9udELdxeU |
| # of Set Screws Required per Hub | 1 |
| Axial Misalignment (∆ Ka) | 0.51 mm0.020 in |
| Bore Size | 1 x 1 1/4 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 17.65838 in3 |
| Dimension HD | 55.12 mm2.170 in |
| Hub Size | U125S |
| Hub Style | Short |
| Keyway Size (W x D) | 1/4 x 1/8 in |
| Length thru Bore | 27.94 mm1.100 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 31.75 mm1.25 in |
| Max. Parallel Misalignment | 0.76 mm0.030 in |
| Max. Speed | 6000 rpm |
| Max. Torque | 755 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 16.00 mm0.625 in |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. OAL Tolerance: + 1/8 inch. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 95.25 mm3.75 in |
| Pin Location (Dimension SL) | 0.62 in |
| Pin Size | 0.313 in |
| Rated HP at 100 rpm | 1.21 hp |
| Set Screw Thread Size (Dimension T) | 3/8-16 |
| Type | Shaft-to-Shaft |
| Weight (Complete Coupling w/ Max. Bores) | 2.74 lb |
| Wind-Up Angle at Max. Torque | 3.00 o |
| Wind-Up Angle at Nominal Torque | 1.22 o |
MSM50BRHFRSS
📏 Dimensions on request
X32926M
📏 Dimensions on request
61907-2RS
📏 Dimensions on request
LSM240BXHSDHTPS
📏 Dimensions on request
LSE211BXHSAFQA-4BATL
📏 Dimensions on request
22330KEMBW33W800C4
📏 Dimensions on request
LSE215BRHSAFQARSS
📏 Dimensions on request
LSM135BXHSNQRSS
📏 Dimensions on request
MSM600BXHSHTPS
📏 Dimensions on request
80X110X12-R2LS32-V
📏 Dimensions on request
6208-Z-C3
📏 Dimensions on request
68514436104
📏 Dimensions on request
P202K FS50000
📏 Dimensions on request