HSE512BRHSHTPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514441962
Custom & Special Bearings · Dimensions on request
2.77 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514441962 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 2.77 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 2.77 lb |
| Catalogue Ref. | 4f1uRbcRe4 |
| # of Set Screws Required per Hub | 1 |
| Axial Misalignment (∆ Ka) | 1.02 mm0.040 in |
| Bore Size | 3/4 x 1 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 18.34265 in3 |
| Dimension HD | 53.59 mm2.11 in |
| Hub Size | U100R |
| Hub Style | Regular |
| Keyway Size (W x D) | 3/16 x 3/32 & 1/4 x 1/8 in |
| Length thru Bore | 32.77 mm1.290 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 25.40 mm1.000 in |
| Max. Parallel Misalignment | 0.76 mm0.030 in |
| Max. Speed | 6000 rpm |
| Max. Torque | 565 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 11.13 mm0.438 in |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. OAL Tolerance: + 1/8 inch. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 104.65 mm4.120 in |
| Pin Location (Dimension SL) | 0.560 in |
| Rated HP at 100 rpm | 0.90 hp |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Type | Shaft-to-Shaft |
| Wind-Up Angle at Max. Torque | 3.00 o |
| Wind-Up Angle at Nominal Torque | 1.03 o |
HYDNUT250-HEAVY.SEAL
📏 Dimensions on request
68514463636
📏 Dimensions on request
230/560KYMBW507C08C3
📏 Dimensions on request
LSE212BRHSAFQ-4B
📏 Dimensions on request
69790498358
📏 Dimensions on request
68514418698
📏 Dimensions on request
68514415388
📏 Dimensions on request
HSE504BRHSKPS
📏 Dimensions on request
LSE212BXHSAFQA-4BKPS
📏 Dimensions on request
68514412468
📏 Dimensions on request
100X115X9-RLS35-S
📏 Dimensions on request
68514442320
📏 Dimensions on request