LSE407BXHSAFQ
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514441950
Custom & Special Bearings · Dimensions on request
0.30 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514441950 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.30 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.30 lb |
| Catalogue Ref. | GgxJqr2I1w |
| # of Set Screws Required per Hub | 1 |
| Axial Misalignment (∆ Ka) | 0.25 mm0.010 in |
| Bore Dia. [Max] | 13.00 mm0.500 in |
| Bore Size | 3/8 x 3/8 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 1.96851 in3 |
| Dimension HD | 26.42 mm1.040 in |
| Hub Size | U50S |
| Hub Style | Short |
| Keyway Size (W x D) | No Keyway |
| Length thru Bore | 12.70 mm0.500 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 12.70 mm0.500 in |
| Max. Parallel Misalignment | 0.36 mm0.014 in |
| Max. Speed | 30000.00 rpm |
| Max. Torque | 82 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 8.00 mm0.313 in |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. OAL Tolerance: + 1/8 inch. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 46.23 mm1.820 in |
| Pin Location (Dimension SL) | 0.310 in |
| Rated HP at 100 rpm | 0.13 hp |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Type | Shaft-to-Shaft |
| Weight (Complete Coupling w/ Max. Bores) | 0.36 lb |
| Wind-Up Angle at Max. Torque | 3.00 o |
| Wind-Up Angle at Nominal Torque | 1.05 o |
011BULK
📏 Dimensions on request
LSE511BXHSKPS
📏 Dimensions on request
LSE912BXHFATL
📏 Dimensions on request
LSM500BRHSHTPS
📏 Dimensions on request
68514477189
📏 Dimensions on request
68514410480
📏 Dimensions on request
68514418042
📏 Dimensions on request
MSM250BXHS
📏 Dimensions on request
68514418817
📏 Dimensions on request
6320-2RZ
📏 Dimensions on request
HYDNUT110-INCH.SEAL
📏 Dimensions on request