95X115X12-RLS35-S
📏 Dimensions on request
Product Photo
TIMKENBearing Accessories
TIMKEN 68514440738
Bearing Accessories · Dimensions on request
0.50 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514440738 is a Bearing Accessories, available in the dimensions listed in the specification table below, and a unit weight of 0.50 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Bearing Accessories |
| Type | Bearing Accessories |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.50 lb |
| Catalogue Ref. | HAnGBq746V |
| Angular Misalignment | 0.25 º |
| Axial Misalignment | 0.1250 in |
| Color | Orange |
| Connection Type A x B | Coupling Sleeve |
| Coupling Size | 6H |
| Cubic inches | 12.37500 in3 |
| Dimension L | 47.75 mm1.880 in |
| Features | Hytrel is a polyester elastomer designed for high torque and high temperature applications and offers excellent resistance to chemical and oil conditions. Color is orange. |
| Length (Dimension Series G) | 22.35 mm0.880 in |
| Material | Hytrel® |
| Max. Bore | 1.438 in |
| Max. Parallel Misalignment | 0.035 in |
| Max. Speed | 6000 rpm |
| Max. Torsional Wind-Up Angle | 7.00 º |
| Min. Bore | 0.625 in |
| Nominal Torque | Series 203.37 N·m1800 in·lb |
| Notes | Operating Hytrel within a high service factor application is not recommended.H and HS Type sleeves are designed for high torque applications, transmitting about 4 times as much power as an equivalent EPDM or Neoprene sleeve.Hytrel sleeves can be used only with S or SC flanges and can not be used with J or B flanges.Hytrel sleeves should not be used as direct replacements for EPDM or Neoprene applications. |
| Outside Diameter | 95.25 mm3.75 in |
| Sleeve Type | H |
| Temperature | -54 to 121 ºC |
| Type | Sleeves for S-Flex Endurance Couplings |
AHX3288
📏 Dimensions on request
450535
📏 Dimensions on request
254BULK
📏 Dimensions on request
40973S
📏 Dimensions on request
1115KPPB3
📏 Dimensions on request
1217 K
📏 Dimensions on request
470687
📏 Dimensions on request
SNW-13 x 2 3/16
📏 Dimensions on request
1015KRRB
📏 Dimensions on request
HMZ27
📏 Dimensions on request
75X100X13-R2LS32-S
📏 Dimensions on request
472492
📏 Dimensions on request
HMV - 138
📏 Dimensions on request