Name: TIMKEN 68514439311
Brand: TIMKEN
SKU: cLALtb2X1P

TIMKEN 68514439311

Custom & Special Bearings · Dimensions on request

0.90 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514439311 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.90 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

0.90 lb

Catalogue Ref.

cLALtb2X1P

Bore Size

1 in

Bore Type

Finished Bore

Color

Metallic

Coupling Design

The Deltaflex coupling is the real solution to installation, misalignment, and performance problems. Conventional couplings – even when carefully aligned to the manufacturers specifications – cannot match the low level of vibration, moment of inertia, and additional cushion for future misalignment of a visually aligned Deltaflex coupling. In addition, the Deltaflex coupling gives longer life to equipment shaft bearings. That means longer operating time and reduced maintenance cost. The Deltaflex can handle greater shaft misalignment without generating heavy reaction loads on the equipment shaft bearings. A properly applied and installed Deltaflex coupling offers more equipment protection compared to conventional couplings.

Coupling Type

Flex-Link

Cubic inches

8.06093 in3

Dimension BC

53.85 mm2.120 in

Dimension HD

2.560 in

Dimension P

38.049 to 38.100 mm1.498 to 1.500 in

Dimension Q

2.29 mm0.090 in

Dimension R

111.07 mm4.373 in

Dimension TH (Axial Cap / Screw Tap)

1/4-20 x 0.62

Features

Maximum misalignment capabilities, with negligible reactionary load, for longer equipment bearing lifeOperates as smoothly when misaligned as when perfectly aligned No lubrication and no maintenance required Equipment can be visually aligned. No special tools are required, which saves on installation time and costEliminates premature equipment bearing and seal failure resulting from misalignment forces. This means greater equipment productivityTorsionally stiff coupling with no backlash means it is capable of high speed applications, within catalog ratingsProvides long-term performance and economy Available in 5 basic sizes, from 10HP to 900HP Standard all-metal and stainless steel versions are both available from stock Many configurations are available, including shaft-to-shaft, spacer, floating shaft, and special assemblies

Hub Style

Round

Keyway Size (W x D)

1/4 x 1/8 in

Length thru Bore

1.34 in

Material

Stainless Steel

Max. Bore (Dimension ID)

41 mm1.625 in

Max. Continuous Torque

750.00 in·lb

Min. Bore (Dimension ID)

0.440 in

Notes

Size 50: In some bore sizes the tap is 5/8-18. Maximum bores are provided with standard keyway.RSB hubs do not have a keyway. Both Delta hubs and Round hubs are provided with two set screws at 120°.

Peak Overload Torque

1125.00 in·lb

Rated HP at 1,150 rpm (Standard Motor)

13.80 hp

Rated HP at 1,750 rpm (Standard Motor)

21.00 hp

Rated HP at 100 rpm

1.20 hp

Rated HP at 3,500 rpm (Standard Motor)

42.00 hp

Rated HP at 875 rpm (Standard Motor)

10.50 hp

Set Screw Thread Size (Dimension T)