Name: TIMKEN 68514438097
Brand: TIMKEN
SKU: zhcJMj7X80

TIMKEN 68514438097

Custom & Special Bearings · Dimensions on request

0.15 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514438097 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.15 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

0.15 lb

Catalogue Ref.

zhcJMj7X80

Angular Misalignment

0.50 º

Chemical Resistance

Excellent

Color

Tan

Coupling Size

L110, AL110

Coupling Type

Jaw

Cubic inches

8.21708 in3

Damping Capacity

Low

Dimension A

84.07 mm3.310 in

Dimension B

11.43 mm0.450 in

Dimension H

29.97 mm1.180 in

Dimension W

19.05 mm0.75 in

Elastomers in Compression

Lovejoy offers four types of elastomer designs to allow for additional flexibility in addressing specific application requirements. One piece designs are used in the L and AL models (referred to as spiders) and multiple part load cushions are used in the C and H model couplings. The load cushions are in sets of 6 to 14 pieces depending on coupling size.Solid Center Spider The solid center design is commonly used design when shafts of the driver and driven equipment can be kept separate by a standard gapOpen Center SpiderThe open center design allows for the shafts of the driver and driven to be positioned within a short distance Open center spiders offer shaft positioning flexibility but have a lower RPM capacity (1,750 RPM maximum for NBR, 3,600 maximum for Urethane/Hytrel®)Cushions Used exclusively for the C and H Type couplings Load cushions are held in place radially by a steel collar which is attached to one of the hubsSnap Wrap Flexible Spider Design allows for easy removal of the spider without moving the hubs Allows for close shaft separation all the way up to the hubs maximum bore Maximum RPM is 1,750 RPM with the retaining ring, but if used with the LC Type (with collar) the normal RPM rating of the coupling applies Style is available in NBR and Urethane only, and in limited sizes

Insert Style

Open Center

Material

Hytrel®

Max. Bore (Dimensions ID1/ID2)

42 mm1.625 in

Nominal Torque

256.00 N·m2268.00 in·lb

Normal Temperature Range

-51 to 121 ºC

Parallel Misalignment

0.0150 in

Shore Hardness

55D

Spider Performance

Hytrel is a flexible elastomer designed for high torque and high temperature operations. Hytrel can operate in temperatures of -60° to 250° F (-51° to 121° C) and has an excellent resistance to oil and chemicals. Not recommended for cyclic or start/stop applications.

Type

Elastomeric Insert