RA103RRB2
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514436180
Custom & Special Bearings · Dimensions on request
11.17 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514436180 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 11.17 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 11.17 lb |
| Catalogue Ref. | AT8qM92Z1S |
| Bore Size | 2 in |
| Bore Type | Finished Bore |
| Color | Gray |
| Coupling Size | 10S |
| Coupling Type | S-Flex |
| Cubic inches | 151.87500 in3 |
| Dimension FL | 30.99 mm1.220 in |
| Dimension HD | 111.25 mm4.380 in |
| Dimension L | 68.58 mm2.700 in |
| Dimension P | 20.57 mm0.810 in |
| Dimension SL | 10.41 mm0.410 in |
| Keyway Size (W x D) | 1/2 x 1/4 in |
| Material | Cast Iron |
| Max. Bore (Dimension ID) | 2.750 in |
| Max. Speed | 3600.00 rpm |
| Nominal Torque (with EPDM Sleeve) | 2875 in·lb |
| Notes | All standard finished bore keyway flanges have 2 set screws at 90°.Sizes 13, 14 and 16 RSB flanges are suitable for reboring and have two set screws at 90°. Sizes 5-12 RSB flanges have no set screws.Metric Bore / Keyway per DIN specifications.Spacing between shafts should be greater than 1/8 inch and less than OAL minus the sum of the two bore dimensions. |
| Outside Diameter | 190.50 mm7.500 in |
| Rated HP at 1,200 rpm | 55.00 hp |
| Rated HP at 1,800 rpm | 82.00 hp |
| Rated HP at 100 rpm | 4.60 hp |
| Rated HP at 3,600 rpm | 1Series 64.00 hp |
| Thread (Dimension T) | 1/2-13 |
| Torsional Stiffness | 10980.00 in·lb/rad |
| Type | Coupling Flange |
MSM180BRHSHTPS
📏 Dimensions on request
LSM280BXHSATL
📏 Dimensions on request
LSE507BRHSAFQ
📏 Dimensions on request
68514477196
📏 Dimensions on request
LSM230BRHFKPS
📏 Dimensions on request
022PKG
📏 Dimensions on request
LSM55BRHSNQ
📏 Dimensions on request
68514411334
📏 Dimensions on request
68514411579
📏 Dimensions on request
55200 - 55437
📏 Dimensions on request
61912
📏 Dimensions on request
KA11-MSA
📏 Dimensions on request
99603
📏 Dimensions on request