68514420387
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514435442
Custom & Special Bearings · Dimensions on request
45.20 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514435442 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 45.20 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 45.20 lb |
| Catalogue Ref. | 9pCoY6eefK |
| Bore Size | 2 3/Series 8 in |
| Bore Type | Finished Bore |
| Color | Gray |
| Coupling Size | 13S |
| Coupling Type | S-Flex |
| Cubic inches | 604.71375 in3 |
| Dimension FL | 50.04 mm1.970 in |
| Dimension HD | 171.45 mm6.750 in |
| Dimension L | 111.25 mm4.380 in |
| Dimension P | Series 33.27 mm1.310 in |
| Dimension SL | 20.57 mm0.810 in |
| Keyway Size (W x D) | Series 5/Series 8 x Series 5/16 in |
| Material | Cast Iron |
| Max. Bore (Dimension ID) | 4.500 in |
| Max. Speed | 2400.00 rpm |
| Nominal Torque (with EPDM Sleeve) | 11350 in·lb |
| Notes | All standard finished bore keyway flanges have 2 set screws at 90°.Sizes Series 13, 14 and 16 RSB flanges are suitable for reboring and have two set screws at 90°. Sizes Series 5-Series 12 RSB flanges have no set screws.Metric Bore / Keyway per DIN specifications.Spacing between shafts should be greater than 1/Series 8 inch and less than OAL minus the sum of the two bore dimensions. |
| Outside Diameter | 298.45 mm11.750 in |
| Rated HP at 1,200 rpm | 216.00 hp |
| Rated HP at 1,800 rpm | 324.00 hp |
| Rated HP at 100 rpm | 18.00 hp |
| Thread (Dimension T) | Series 5/Series 8-11 |
| Torsional Stiffness | 43350.00 in·lb/rad |
| Type | Coupling Flange |
LSE708BRHSAFQATL
📏 Dimensions on request
LSE300BRHS
📏 Dimensions on request
MSM460BRHSRSS
📏 Dimensions on request
LSE207BRHSRSS
📏 Dimensions on request
MSE908BXHFKPS
📏 Dimensions on request
MSM130BRHTTHTPS
📏 Dimensions on request
24780 - 24720
📏 Dimensions on request
68514476836
📏 Dimensions on request
68514450163
📏 Dimensions on request
68514458119
📏 Dimensions on request
22336EMBW33W800C4
📏 Dimensions on request
LSM40BRHSNRSS
📏 Dimensions on request
LSM260BXHSDQ
📏 Dimensions on request