355 VRME R
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514426095
Custom & Special Bearings · Dimensions on request
0.10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514426095 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.10 lb |
| Catalogue Ref. | eLs42D9Aa1 |
| # of Set Screws Required per Hub | 1 |
| Axial Misalignment (∆ Ka) | 0.51 mm0.020 in |
| Bore Size | 1/4 x 1/4 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 0.79935 in3 |
| Dimension HD | 18.54 mm0.730 in |
| Hub Size | U25R |
| Hub Style | Regular |
| Keyway Size (W x D) | No Keyway |
| Length thru Bore | 9.65 mm0.380 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 7.95 mm0.313 in |
| Max. Parallel Misalignment | 0.28 mm0.011 in |
| Max. Speed | 30000.00 rpm |
| Max. Torque | 34.00 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 3.00 mm0.125 in |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. OAL Tolerance: + 1/8 inch. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 38.10 mm1.500 in |
| Pin Location (Dimension SL) | 0.160 in |
| Rated HP at 100 rpm | 0.05 hp |
| Set Screw Thread Size (Dimension T) | 6-32 |
| Type | Shaft-to-Shaft |
| Wind-Up Angle at Max. Torque | 4.5 o |
| Wind-Up Angle at Nominal Torque | 1.80 o |
K 72×80×25ANDGEDimensions on request
SNT 516-613 - 22313K - LO613/ 2-1/4
📏 Dimensions on request
68514462568
📏 Dimensions on request
120X155X16-R2LS32-S
📏 Dimensions on request
387 - 383A
📏 Dimensions on request
68514480083
📏 Dimensions on request
68514445544
📏 Dimensions on request
HM88649 - HM88610A
📏 Dimensions on request
6385 - 6321
📏 Dimensions on request
LSM300BXHSRSS
📏 Dimensions on request
LSE400BRHSAFQHTPS
📏 Dimensions on request