6022-NR
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514426079
Custom & Special Bearings · Dimensions on request
6.40 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514426079 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 6.40 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 6.40 lb |
| Catalogue Ref. | dlvYoKbCcw |
| # of Bolts | 6 |
| Bolt Grade | # 5 |
| Bolt Size | 3/8-16 x 2 |
| Bore Type | Rough Stock Bore |
| Color | Gray/Metallic |
| Complete Coupling Weight | 6.50 lb |
| Connection Type A x B | 3/4 x 3/4 in |
| Coupling | S13 |
| Coupling Design | Elastomeric Pre-compression Type Saga is a general purpose, torsionally soft coupling with high tolerance to all forms of misalignment. The design features hexagonal or octagonal rubber donut-shaped elements with metal inserts positioned at each apex during the vulcanization process. These metal inserts carry actual bolts which fix the element to tines on cast, cylindrical hubs. Embedded inserts also have tines which connect with mating surfaces on hubs so that axial bolts can be easily torqued during assembly without twisting the rubber beyond the limits of its elasticity. The rubber between each apex is precompressed, so it is much more durable to the stresses arising from the various forms of misalignment and torsional vibrations.While the Saga coupling is normally associated with shaft-to-shaft applications, adaptations for flange and flywheel mountings can be made. In addition, a floating shaft version for use in lieu of a universal joint drive shaft with separate torsional coupling is available. Its elements can also be stacked in series for use in applications with extreme transient or permanent parallel misalignment, or where torsional dynamics demand an extremely soft element for proper damping and/or vibratory decoupling. The rubber’s stiffness of 60 as measured against Shore A by durometer, covers the majority of such situations. |
| Coupling Type | Torsional |
| Cubic inches | 95.62205 in3 |
| Dimension BC | 77.72 mm3.060 in |
| Dimension HD | 2.250 in |
| Dimension L | 33.27 mm1.310 in |
| Dynamic Torsional Stiffness | 3839.00 in·lb/rad |
| Element Material | Natural Rubber |
| Features | No end thrust in misalignment position Absorbs misalignment and shock No axial reaction force to damage or accelerate wear in system bearingsAccepts constant angular misalignment of up to 3° Parallel tolerance of 0.060 (1.5mm), while reaction force remains low Lateral softness without complication, or sacrifice of performance or durability Natural rubber can operate in temperatures from -60° to 200° F (-51° to 93° C) |
| Length thru Bore | 1.75 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 1.375 in |
| Max. Shock Load | 1800.00 in·lb |
| Max. Speed | 8400.00 rpm |
| Moment of Inertia WR2 | 6.600 lb·in2 |
| Notes | For applications requiring simultaneous angular and parallel misalignment, consult Lovejoy Engineering to ensure that heat generated from all three forms of stress do not exceed the coupling’s ability to dissipate heat.For higher speeds, balancing may be necessary.Standard bores available by 1/16 inch increments.Some metric sizes also available as standard. |
| Operating Temperature Range | -60 to 200 oF |
| Outside Diameter | 4.280 in |
| Overall Length | 5.220 in |
| Rated HP at 100 rpm for 1.0 Service Factor | 0.95 hp |
| Rated Torque for 1.0 SF | 600.00 in·lb |
| Rated Torque for 1.0 Service Factor | 600.00 in·lb |
| Recommended Torque (Dry) | 30.00 ft·lb |
| Recommended Torque (Wet) | 23.00 ft·lb |
| Rough Stock Bore | 3/4 in |
| Set Screw Thread Size (Dimension T) | No Setscrew |
| Specific Torsional Stiffness | 6.40 in·lb/rad |
| Style | Flexible |
| Type | Torsional |
TKVD15-W-U
📏 Dimensions on request
68514439310
📏 Dimensions on request
69790497954
📏 Dimensions on request
61913-ZZ
📏 Dimensions on request
68514411838
📏 Dimensions on request
3386 - 3328
📏 Dimensions on request
68514442597
📏 Dimensions on request
68514416363
📏 Dimensions on request
33262A - 33462DC
📏 Dimensions on request
LSE407BXHFRSS
📏 Dimensions on request
68514439430
📏 Dimensions on request
SNT 530 - 22230 - VR230
📏 Dimensions on request
84527105104
📏 Dimensions on request