Name: TIMKEN 68514424505
Brand: TIMKEN
SKU: aagMgs351Z

TIMKEN 68514424505

Custom & Special Bearings · Dimensions on request

8.48 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514424505 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 8.48 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

8.48 lb

Catalogue Ref.

aagMgs351Z

Allowable Continuous Vibratory Torque

710.00 in·lb

Bore Type

Rough Stock Bore

Color

Metallic

Coupling Size

LF16

Cubic inches

68.80836 in3

Dimension FD

100.08 mm3.940 in

Dimension FOD

5.910 in

Dynamic Torsional Stiffness

30100.00 in·lb/rad

Features

Wide range of standard designs and materials Application versatility Shaft to shaft or flywheel to shaft designs Designed to accommodate substantial shock loads, vibration, and misalignment Low moment of inertia Electrically insulating No lubrication, maintenance free Unique air-flow cooling design Different element stiffness values allow for torsional tuning of applications with diesel engines Economic design allows for cost effective solutions for torsional applications Proven L-LOC spline-clamping hub virtually eliminates spline shaft profile wear and fretting Oil, heat, and corrosion resistant elements (Hytrel®, Zytel®) When used with S-bolts, the coupling can accommodate some end float S-bolts accommodate applications requiring blind assembly Model 6 unique spacer designs span gaps between equipment in excess of the normal equipment separation Model 6 design available with bearings for high speeds and large amounts of equipment separation

Hub Diameter

70.00 mm2.760 in

Length thru Bore

50.00 mm1.970 in

Max. Angular Misalignment

3.00 o

Max. Bore (Dimensions ID1/ID2)

66.802 mm2.630 in

Max. Parallel Misalignment

2.00 mm0.080 in

Max. Speed

6000 rpm

Min. Bore (Dimensions ID1/ID2)

20.00 mm0.810 in

Nominal Torque

1770.00 in·lb

Notes

For Hytrel, dynamic torsional stiffness values are non-linear with respect to torque. Value given is for 100% of nominal torque. Angular and parallel misalignment values are dependent on speed, and for rubber elements, should be adjusted according to figure 4. Hytrel® elements are only for applications where the driven component is piloted to the driver for SAE and DIN established alignments (i.e. Hydraulic pump flange-mounted to engine flywheel housing).Hytrel® elements are only for applications where the driven component is piloted to the driver for essentially perfect alignment (hydraulic pump flange-mounted to engine housing).

Operating Temperature Range

-40 to 194 oF

Rough Stock Bore Size

0.710 in

Securing Torque for Mounting Bolt

4960.00 in·lb

Shore Hardness

60A

Speed

6000.00 rpm

Static Angular Stiffness

44.00 in·lb/deg

Static Axial Stiffness

570.00 lb/in

Static Radial Stiffness

2860.00 lb/in

Style

Flange

Thread (Dimension T)

M12

Torsional Element Specifications

There are two different rubber element materials available, High Temperature Rubber (HTR) and Neoprene (CR). Both elements are torsionally soft and are placed into compression during assembly. Rubber under compression can carry up to 5 times the amount of torque as non-compressed elements. The elements effectively accommodate shock, misalignment, and vibration plus minimize harmful radial and axial forces on the connected equipment. Neoprene (CR) is used in environments that are hostile to High Temperature Rubber (HTR).Available Durometer Hardness: 50, 60 (Shore A scale)Operating Temperature Range: HTR: -40° to 194° F CR: -40° to 175° FMaximum Angular Misalignment: Up to 3°

Type

Torsional

Wind-Up Angle at Max. Torque

14.00 o

Wind-Up Angle at Nominal Torque

5.00 o