Name: TIMKEN 68514422487
Brand: TIMKEN
SKU: v9uwbebpcg

TIMKEN 68514422487

Custom & Special Bearings · Dimensions on request

0.25 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514422487 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.25 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

0.25 lb

Catalogue Ref.

v9uwbebpcg

Bore Type

Element w/ Hardware

Color

Black

Coupling Size

LF2X

Coupling Type

Torsional

Cubic inches

11.38378 in3

Dynamic Torsional Stiffness

6230.00 Nm/rad / 55150.00 in·lb/rad

Features

Wide range of standard designs and materials Application versatility Shaft to shaft or flywheel to shaft designs Designed to accommodate substantial shock loads, vibration, and misalignment Low moment of inertia Electrically insulating No lubrication, maintenance free Unique air-flow cooling design Different element stiffness values allow for torsional tuning of applications with diesel engines Economic design allows for cost effective solutions for torsional applications Proven L-LOC spline-clamping hub virtually eliminates spline shaft profile wear and "fretting" Oil, heat, and corrosion resistant elements (Hytrel®, Zytel®) When used with S-bolts, the coupling can accommodate some end float S-bolts accommodate applications requiring "blind" assembly Model 6 unique spacer designs span gaps between equipment in excess of the normal equipment separation Model 6 design available with bearings for high speeds and large amounts of equipment separation

Length thru Bore

23.88 mm0.940 in

Material

Zytel®

Max. Angular Misalignment

1.00 º

Max. Axial Misalignment (End Float)

± 0.5 mm± 0.02 in

Max. Parallel Misalignment

0.Series 10 mm0.004 in

Max. Speed

10000 rpm

Max. Torque

60.00 N·m530.00 in·lb

Nominal Torque

30.00 N·m265.00 in·lb

Normal Temperature Range

-40 to 300 ºF

Notes

For Hytrel, dynamic torsional stiffness values are non-linear with respect to torque. Value given is for 100% of nominal torque. Angular and parallel misalignment values are dependent on speed, and for rubber elements, should be adjusted according to figure 4. Hytrel® elements are only for applications where the driven component is piloted to the driver for SAE and DIN established alignments (i.e. Hydraulic pump flange-mounted to engine flywheel housing).Hytrel® elements are only for applications where the driven component is piloted to the driver for essentially perfect alignment (hydraulic pump flange-mounted to engine housing).

Thread (Dimension T)

Torsional Element Specifications

Elements made of DuPont’s highly stress able Zytel® elastomeric compound have excellent chemical compatibility and corrosion resistance. The element composition is 3-times stiffer then Hytrel® elements. Zytel® elements exhibit less than 1° wind up at normal torque and zero backlash. Most suited for applications where heat, moisture, high torque / high speed, and corrosion resistance are critical factors in the coupling selection.Operating Temperature Range: -40° to 300° FMaximum Angular Misalignment: 1°

23034CDK+AH3034NSKDimensions on request