69790498295
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514413942
Custom & Special Bearings · Dimensions on request
3.20 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514413942 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 3.20 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 3.20 lb |
| Catalogue Ref. | lR0tlTebfH |
| # of Mounting Screws Required | 3 |
| Color | Gray/Metallic |
| Coupling | UF125 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Coupling Type | Flange-to-Flange |
| Cubic inches | 79.08762 in3 |
| Dimension BC | 79.25 mm3.120 in |
| Dimension D | 90.42 mm3.560 in |
| Dimension FD | 93.47 mm3.680 in |
| Dimension FL | 12.70 mm0.500 in |
| Dimension FL1 | 12.70 mm0.500 in |
| Dimension HD | 69.85 mm2.750 in |
| Dimension S | 66.55 mm2.620 in |
| Hub Style | Drop Out |
| Length (Dimension S) | 2.62 in |
| Material | Steel |
| Max. Angular Offset | 4.50 o |
| Max. Bore (Dimensions ID) | 41.28 mm1.625 in |
| Max. Parallel Offset | 1.12 mm0.044 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Speed | 6000 rpm |
| Max. Torque | 755.00 in·lb |
| Min. Bore (Dimension ID) | 15.88 mm0.625 in |
| Mounting Screw Thread Size | 5/16-18 |
| Notes | OAL Tolerance + .19 inch.UF Center Drop out Length Tolerance + .12 inch.Mounting screws not supplied. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Pin Location (Dimension SL) | 0.560 in |
| Pin Size | 5/16 in |
| Rated HP at 100 rpm | 1.21 hp |
| Set Screw Thread Size (Dimension T) | No Setscrew |
| Wind-Up Angle at Max. Torque | 1.85 o |
33262 - 33462
📏 Dimensions on request
KIT.KWVE15-B-900
📏 Dimensions on request
69790495603
📏 Dimensions on request
14138A - 14274A
📏 Dimensions on request
LSE504BXHS
📏 Dimensions on request
68514413255
📏 Dimensions on request
NRB5X34,8-G2
📏 Dimensions on request
69790498000
📏 Dimensions on request
LSM120BRHSNQKPS
📏 Dimensions on request
MSM530BXHSHTPS
📏 Dimensions on request