Name: TIMKEN 68514413929
Brand: TIMKEN
SKU: vyjpvH9x9Y

TIMKEN 68514413929

Custom & Special Bearings · Dimensions on request

0.33 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514413929 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.33 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

0.33 lb

Catalogue Ref.

vyjpvH9x9Y

# of Mounting Screws Required

Color

Gray/Metallic

Coupling

UF75

Coupling Design

Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.

Coupling Type

Flange-to-Flange

Cubic inches

26.68750 in3

Dimension BC

50.80 mm2.000 in

Dimension D

60.45 mm2.380 in

Dimension FD

63.50 mm2.500 in

Dimension FL1

9.65 mm0.380 in

Dimension HD

63.50 mm2.500 in

Dimension S

45.97 mm1.810 in

Hub Style

Drop Out

Length (Dimension S)

1.81 in

Material

Steel

Max. Angular Offset

4.50 o

Max. Bore (Dimensions ID)

31.75 mm1.25 in

Max. Parallel Offset

0.71 mm0.028 in

Max. Recommended End Play

1.02 mm0.040 in

Max. Speed

20000.00 rpm

Max. Torque

175.00 in·lb

Min. Bore (Dimension ID)

9.53 mm0.375 in

Mounting Screw Thread Size

1/4-20

Notes

OAL Tolerance + .19 inch.UF Center Drop out Length Tolerance + .12 inch.Mounting screws not supplied. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.

Pin Location (Dimension SL)

0.620 in

Pin Size

1/8 in

Rated HP at 100 rpm

0.28 hp

Set Screw Thread Size (Dimension T)

No Setscrew

Wind-Up Angle at Max. Torque

1.82 o