140X170X15-R2LS32-S
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514413915
Custom & Special Bearings · Dimensions on request
10.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514413915 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 10.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 10.00 lb |
| Catalogue Ref. | b4SbuZaWbH |
| # of Mounting Screws Required | 4 |
| # of Set Screws Required | 1 |
| Bore Size | 1 3/8 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 140.66978 in3 |
| Dimension BC | 111.25 mm4.380 in |
| Dimension D | 127.00 mm5.000 in |
| Dimension FL | 16.00 mm0.630 in |
| Dimension HD | 75.69 mm2.980 in |
| Flange Diameter (Dimension FD) | 136.65 mm5.380 in |
| Hub Size | UFH150R |
| Hub Style | Regular |
| Keyway Size (W x D) | 5/16 x 5/32 in |
| Length thru Bore | 47.75 mm1.880 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 38 mm1.5 in |
| Max. Parallel Offset | 1.04 mm0.041 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Speed | 3000 rpm |
| Max. Torque | 1890 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 19.05 mm0.750 in |
| Mounting Screw Thread Size | 3/8-16 |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.OAL & Dimension FL Tolerance + .12 inch.Mounting screws not supplied. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 123.44 mm4.860 in |
| Pin Location (Dimension SL) | 0.810 in |
| Rated HP at 100 rpm | 3.02 hp |
| Set Screw Thread Size (Dimension T) | 3/8-16 |
| Type | Flange-to-Shaft |
| Wind-Up Angle at Max. Torque | 3.00 o |
| Wind-Up Angle at Nominal Torque | 0.85 o |
BA405040ANDGEDimensions on request
68514476356
📏 Dimensions on request
68514456648
📏 Dimensions on request
69790498536
📏 Dimensions on request
68514458105
📏 Dimensions on request
LSM180BRHSDAHTPS
📏 Dimensions on request
68514438888
📏 Dimensions on request
LSM270BRHSRSS
📏 Dimensions on request
68514425113
📏 Dimensions on request
9380 - 9321
📏 Dimensions on request
68514447108
📏 Dimensions on request
69790497993
📏 Dimensions on request
LSM350BRHSRSS
📏 Dimensions on request