Name: TIMKEN 68514413884
Brand: TIMKEN
SKU: CwlrH36j5Y

TIMKEN 68514413884

Custom & Special Bearings · Dimensions on request

2.80 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514413884 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 2.80 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

2.80 lb

Catalogue Ref.

CwlrH36j5Y

# of Mounting Screws Required

# of Set Screws Required

Bore Size

1/2 in

Bore Type

Finished Bore

Color

Gray/Metallic

Coupling Design

Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.

Cubic inches

33.16625 in3

Dimension BC

68.07 mm2.680 in

Dimension D

79.25 mm3.120 in

Dimension FL

9.65 mm0.380 in

Dimension HD

53.59 mm2.11 in

Flange Diameter (Dimension FD)

82.55 mm3.250 in

Hub Size

UFH100R

Hub Style

Regular

Keyway Size (W x D)

1/8 x 1/16 in

Length thru Bore

32.77 mm1.290 in

Material

Steel

Max. Bore (Dimensions ID1/ID2)

25.00 mm1.000 in

Max. Parallel Offset

0.76 mm0.030 in

Max. Recommended End Play

1.02 mm0.040 in

Max. Speed

6000 rpm

Max. Torque

565 in·lb

Min. Bore (Dimensions ID1/ID2)

11.13 mm0.438 in

Mounting Screw Thread Size

5/16-18

Notes

Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.OAL & Dimension FL Tolerance + .12 inch.Mounting screws not supplied.

Operating Temperature Range

-40 to 250 oF

Overall Length

79.76 mm3.140 in

Pin Location (Dimension SL)

0.560 in

Rated HP at 100 rpm

0.90 hp

Set Screw Thread Size (Dimension T)

1/4-20

Type

Flange-to-Shaft