48X68X10-R2LS32-S
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514413880
Custom & Special Bearings · Dimensions on request
1.60 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514413880 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.60 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.60 lb |
| Catalogue Ref. | iEoexd8q8z |
| # of Mounting Screws Required | 3 |
| # of Set Screws Required | 1 |
| Bore Size | 3/4 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 23.39021 in3 |
| Dimension BC | 57.15 mm2.250 in |
| Dimension D | 69.85 mm2.750 in |
| Dimension FL | 9.65 mm0.380 in |
| Dimension HD | 43.94 mm1.730 in |
| Flange Diameter (Dimension FD) | 73.15 mm2.880 in |
| Hub Size | UFH87R |
| Hub Style | Regular |
| Keyway Size (W x D) | 3/16 x 3/32 in |
| Length thru Bore | 21.34 mm0.840 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 22.00 mm0.875 in |
| Max. Parallel Offset | 0.89 mm0.035 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Speed | 10000 rpm |
| Max. Torque | 346 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 11.13 mm0.438 in |
| Mounting Screw Thread Size | 1/4-20 |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.OAL & Dimension FL Tolerance + .12 inch.Mounting screws not supplied. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 71.63 mm2.820 in |
| Pin Location (Dimension SL) | 0.44 in |
| Rated HP at 100 rpm | 0.55 hp |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Type | Flange-to-Shaft |
| Wind-Up Angle at Max. Torque | 4.5 o |
| Wind-Up Angle at Nominal Torque | 1.68 o |
LSM40BRHSHTPS
📏 Dimensions on request
68514439473
📏 Dimensions on request
68514445265
📏 Dimensions on request
SNW-3044 x 7 15/16
📏 Dimensions on request
241/500KYMBW507C08C3
📏 Dimensions on request
68514456801
📏 Dimensions on request
LSE403BRHSATL
📏 Dimensions on request
G1200KLLB
📏 Dimensions on request
MSE403BXHFKPS
📏 Dimensions on request
69790413729
📏 Dimensions on request
69790491430
📏 Dimensions on request