Name: TIMKEN 68514413854
Brand: TIMKEN
SKU: u1ucbi7H7G

TIMKEN 68514413854

Custom & Special Bearings · Dimensions on request

0.50 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514413854 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.50 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

0.50 lb

Catalogue Ref.

u1ucbi7H7G

# of Mounting Screws Required

# of Set Screws Required

Bore Size

1/2 in

Bore Type

Finished Bore

Color

Gray/Metallic

Coupling Design

Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling.

Cubic inches

8.12000 in3

Dimension BC

38.10 mm1.500 in

Dimension D

47.75 mm1.880 in

Dimension FL

6.35 mm0.250 in

Dimension HD

26.42 mm1.040 in

Flange Diameter (Dimension FD)

50.80 mm2.000 in

Hub Size

UFH50R

Hub Style

Regular

Keyway Size (W x D)

No Keyway

Length thru Bore

16.26 mm0.Series 640 in

Material

Steel

Max. Bore (Dimensions ID1/ID2)

13.00 mm0.500 in

Max. Parallel Offset

0.53 mm0.021 in

Max. Recommended End Play

0.89 mm0.035 in

Max. Speed

30000.00 rpm

Min. Bore (Dimensions ID1/ID2)

7.95 mm0.313 in

Mounting Screw Thread Size

1/4-20

Nominal Torque

82 in·lb

Notes

Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.OAL & Dimension FL Tolerance + .12 inch.Mounting screws not supplied.

Operating Temperature Range

-40 to 250 oF

Overall Length

51.56 mm2.030 in

Pin Location (Dimension SL)

0.310 in

Pin Size

0.125 in

Rated HP at 100 rpm

0.13 hp

Rated Torque for 1.0 Service Factor

82.00 in·lb