68514411508
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514413663
Custom & Special Bearings · Dimensions on request
8.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514413663 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 8.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 8.00 lb |
| Catalogue Ref. | 3zklHVcsdz |
| # of Set Screws Required per Hub | 1 |
| Axial Misalignment (∆ Ka) | 1.02 mm0.040 in |
| Bore Size | 1 1/2 x 1 1/2 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 55.76891 in3 |
| Dimension HD | 75.69 mm2.980 in |
| Hub Size | U150R |
| Hub Style | Regular |
| Keyway Size (W x D) | 3/8 x 3/16 in |
| Length thru Bore | 47.75 mm1.880 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 38.10 mm1.5 in |
| Max. Parallel Misalignment | 1.04 mm0.041 in |
| Max. Speed | 3000 rpm |
| Max. Torque | 1890 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 19.05 mm0.750 in |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. OAL Tolerance: + 1/8 inch. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 159.51 mm6.280 in |
| Pin Location (Dimension SL) | 0.810 in |
| Rated HP at 100 rpm | 3.02 hp |
| Set Screw Thread Size (Dimension T) | 3/8-16 |
| Type | Shaft-to-Shaft |
| Wind-Up Angle at Max. Torque | 3.00 o |
| Wind-Up Angle at Nominal Torque | 0.85 o |
MSM70BRHTP
📏 Dimensions on request
69790498540
📏 Dimensions on request
68514437353
📏 Dimensions on request
GN307KRRB
📏 Dimensions on request
LSM50BRHSHTPS
📏 Dimensions on request
MSE311BRHSATL
📏 Dimensions on request
MSE212BRHSRSS
📏 Dimensions on request
68514458577
📏 Dimensions on request
MSE415BRHSATL
📏 Dimensions on request
SNT 524-620 - 21320K - TA620/ 3-1/2
📏 Dimensions on request
MSM65BXHS
📏 Dimensions on request
69790498339
📏 Dimensions on request
KIT.KWVE30-B-430
📏 Dimensions on request