68514436128
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514413103
Custom & Special Bearings · Dimensions on request
0.22 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514413103 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.22 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.22 lb |
| Catalogue Ref. | 5gUuut3P2U |
| # of Set Screws Required per Hub | 1 |
| Axial Misalignment (∆ Ka) | 0.38 mm0.015 in |
| Bore Dia. [Max] | 10.00 mm0.375 in |
| Bore Size | 3/8 x 3/8 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 1.22034 in3 |
| Dimension HD | 21.84 mm0.860 in |
| Hub Size | U37S |
| Hub Style | Short |
| Keyway Size (W x D) | No Keyway |
| Length thru Bore | 13.21 mm0.520 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 9.53 mm0.375 in |
| Max. Parallel Misalignment | 0.23 mm0.009 in |
| Max. Speed | 30000.00 rpm |
| Max. Torque | 39.00 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 6 mm0.250 in |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. OAL Tolerance: + 1/8 inch. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 41.91 mm1.650 in |
| Pin Location (Dimension SL) | 0.250 in |
| Rated HP at 100 rpm | 0.06 hp |
| Set Screw Thread Size (Dimension T) | 10-24 |
| Type | Shaft-to-Shaft |
| Weight (Complete Coupling w/ Max. Bores) | 0.27 lb |
| Wind-Up Angle at Max. Torque | 3.00 o |
| Wind-Up Angle at Nominal Torque | 1.09 o |
MSE511BRHSRSS
📏 Dimensions on request
120X160X12-RLS35-V
📏 Dimensions on request
68514456698
📏 Dimensions on request
SNT 520-617 - 22220K - TSNG520
📏 Dimensions on request
SNT 528 - 23228K - LO528/ 4-15/16
📏 Dimensions on request
22338EMBW33W800C4
📏 Dimensions on request
HSM320BRHSKPS
📏 Dimensions on request
120X140X13-RLS35-S
📏 Dimensions on request
68514456644
📏 Dimensions on request
LSM60BRHSNKPS
📏 Dimensions on request
10X40X7-R2LS32-S
📏 Dimensions on request