MSE504BXHSAFQATL
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514412406
Custom & Special Bearings · Dimensions on request
0.39 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514412406 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.39 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.39 lb |
| Catalogue Ref. | EHTMmN2E1r |
| Angular Misalignment | 1.00 o |
| Chemical Resistance | Good |
| Color | Black |
| Coupling Size | L225 |
| Coupling Type | Jaw |
| Cubic inches | 21.82435 in3 |
| Damping Capacity | High |
| Dimension A | 126.49 mm4.980 in |
| Dimension B | 18.54 mm0.730 in |
| Dimension H | 44.45 mm1.750 in |
| Dimension W | 22.35 mm0.88 in |
| Elastomers in Compression | Lovejoy offers four types of elastomer designs to allow for additional flexibility in addressing specific application requirements. One piece designs are used in the L and AL models (referred to as spiders) and multiple part load cushions are used in the C and H model couplings. The load cushions are in sets of 6 to 14 pieces depending on coupling size.Solid Center Spider The solid center design is commonly used design when shafts of the driver and driven equipment can be kept separate by a standard gapOpen Center SpiderThe open center design allows for the shafts of the driver and driven to be positioned within a short distance Open center spiders offer shaft positioning flexibility but have a lower RPM capacity (1,750 RPM maximum for NBR, 3,600 maximum for Urethane/Hytrel®)Cushions Used exclusively for the C and H Type couplings Load cushions are held in place radially by a steel collar which is attached to one of the hubsSnap Wrap Flexible Spider Design allows for easy removal of the spider without moving the hubs Allows for close shaft separation all the way up to the hubs maximum bore Maximum RPM is 1,750 RPM with the retaining ring, but if used with the LC Type (with collar) the normal RPM rating of the coupling applies Style is available in NBR and Urethane only, and in limited sizes |
| Insert Style | Open Center |
| Material | SOX (NBR) Rubber |
| Max. Bore (Dimensions ID1/ID2) | 65 mm2.625 in |
| Nominal Torque | 2Series 64.00 N·m2340.00 in·lb |
| Normal Temperature Range | -40 to 100 oC |
| Notes | NBR standard shore hardness is 80A ±5A – Except L035=60A. Other softer or harder designs are available in NBR material; consult Lovejoy. |
| Parallel Misalignment | 0.0150 in |
| Shore Hardness | 80A |
| Spider Performance | Nitrile Butadiene (Buna N) Rubber is a flexible elastomer material that is oil resistant, resembles natural rubber in resilience and elasticity and operates effectively in temperature range of -40° to 212° F (-40° to 100° C). Good resistance to oil. Standard elastomer. (Also applies to SXB Cushions.) |
| Type | Elastomeric Insert |
69790498394
📏 Dimensions on request
69790405219
📏 Dimensions on request
68514442295
📏 Dimensions on request
68514458107
📏 Dimensions on request
LSM600BRHSKPS
📏 Dimensions on request
HSM170BXHSHTPS
📏 Dimensions on request
SNT 519-616 - 22316K - LO616
📏 Dimensions on request
68514428878
📏 Dimensions on request
68514438568
📏 Dimensions on request
68514476506
📏 Dimensions on request
68514462026
📏 Dimensions on request