MSE708BRHFHTPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514412275
Custom & Special Bearings · Dimensions on request
0.30 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514412275 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.30 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.30 lb |
| Catalogue Ref. | Hzagig3T2Y |
| Angular Misalignment | 1.00 o |
| Chemical Resistance | Good |
| Color | Black |
| Coupling | SW190 |
| Coupling Type | Jaw |
| Cubic inches | 136.84524 in3 |
| Damping Capacity | High |
| Dimension AA | 131.57 mm5.18 in |
| Dimension B | 15.24 mm0.60 in |
| Dimension HH | 57.15 mm2.25 in |
| Dimension W | 22.35 mm0.88 in |
| Elastomers in Compression | Lovejoy offers four types of elastomer designs to allow for additional flexibility in addressing specific application requirements. One piece designs are used in the L and AL models (referred to as spiders) and multiple part load cushions are used in the C and H model couplings. The load cushions are in sets of 6 to 14 pieces depending on coupling size.Solid Center Spider The solid center design is commonly used design when shafts of the driver and driven equipment can be kept separate by a standard gapOpen Center SpiderThe open center design allows for the shafts of the driver and driven to be positioned within a short distance Open center spiders offer shaft positioning flexibility but have a lower RPM capacity (1,750 RPM maximum for NBR, 3,600 maximum for Urethane/Hytrel®)Cushions Used exclusively for the C and H Type couplings Load cushions are held in place radially by a steel collar which is attached to one of the hubsSnap Wrap Flexible Spider Design allows for easy removal of the spider without moving the hubs Allows for close shaft separation all the way up to the hubs maximum bore Maximum RPM is 1,750 RPM with the retaining ring, but if used with the LC Type (with collar) the normal RPM rating of the coupling applies Style is available in NBR and Urethane only, and in limited sizes |
| Insert Style | Snap Wrap without Ring |
| Material | SOX (NBR) Rubber |
| Normal Temperature Range | -40 to 100 oC |
| Notes | NBR standard shore hardness is 80A ±5A – Except L035=60A. Other softer or harder designs are available in NBR material; consult Lovejoy. |
| Parallel Misalignment | 0.150 in |
| Shore Hardness | 80A |
| Spider Performance | Nitrile Butadiene (Buna N) Rubber is a flexible elastomer material that is oil resistant, resembles natural rubber in resilience and elasticity and operates effectively in temperature range of -40° to 212° F (-40° to 100° C). Good resistance to oil. Standard elastomer. (Also applies to SXB Cushions.) |
| Torque | 195 N·m1728.00 in·lb |
| Type | Elastomeric Insert |
| UPC Code | 685144122759 |
3960 - 3925
📏 Dimensions on request
MSM55BXHSATL
📏 Dimensions on request
NRB4X11,8-G2
📏 Dimensions on request
SNT 520-617 - 22317K - TA617/ 3
📏 Dimensions on request
G1014KPPB3
📏 Dimensions on request
68514437909
📏 Dimensions on request
MSM85BXHSKPS
📏 Dimensions on request
TSX35-E-ADK
📏 Dimensions on request
HSE412BRHS
📏 Dimensions on request