705RX3131B
📏 Dimensions on request
Product Photo
TIMKENCylindrical Roller Bearings
TIMKEN 496D - 492A
Cylindrical Roller Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 496D - 492A is a Cylindrical Roller Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Cylindrical Roller Bearings |
| Type | Cylindrical Roller Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | UgTCk3776Y |
| Aa - Cage-Cone Backface Clearance | 0 mm0 in |
| Ab - Cage-Cone Frontface Clearance | 3 mm0.12 in |
| B - Double Cone Width | 59.538 mm2.3440 in |
| Bearing Weight | 3.1 Kg6.9 lb |
| C - Cup Width | 22.225 mm0.8750 in |
| Cage Type | Stamped Steel |
| Cone Part Number | 496D |
| Cup Part Number | 492A |
| D - Cup Outer Diameter | 133.350 mm5.2500 in |
| Db - Cup Backface Backing Diameter | 119.90 mm4.72 in |
| Design Units | Imperial |
| G2 - Heat Generation Factor (Rib-Roller End) | 29.3 |
| Note | Spacer shows standard nominal .01 radii, actual bearing may vary |
| Series | 495 |
| T - Bearing Width across Cups | 60.325 mm2.3750 in |
| d - Bore | 80.963 mm3.1875 in |
| da - Cone Frontface Backing Diameter | 90.90 mm3.58 in |
387-S - 384ED
📏 Dimensions on request
MSE600BRHTTKPS
📏 Dimensions on request
LSE1300BXHSKPS
📏 Dimensions on request
LSE500BXHSNHTPS
📏 Dimensions on request
1986 - 1931-B
📏 Dimensions on request
LSE207BXHSAFQA
📏 Dimensions on request
HSE2200BXHSKPS
📏 Dimensions on request
LSE1400BRHSHTPS
📏 Dimensions on request
LSE300BRHSNQHTPS
📏 Dimensions on request
HSE1100BXHSATL
📏 Dimensions on request