Product Details
Product Details
- INA MLF52130-300-ZR
- Brand: INA
- Type series: Series MLF..-ZR
- Model: MLF52130-300-ZR
- H : 119mm B : 130mm L : 300mm Weight: 2.7Kg
Product parameters
| Description | |||
| L2 = Total stroke + L + Series 12 L tot = Total stroke + L + 2 x L4 + Series 12 Total stroke= Effective stroke + 2 x S Attention: S Refers to safety margin suitable for special applications, Should be at least85 mm; Total stroke unit ismm. MaximumGuideway length L2 = 8000 mm | |||
| Series 32 AT Series 10 | Toothed belt | ||
| 1750 | N (type) | Permissible working load of toothed belt | |
| 73.5 | Nm | MaximumDriving torque | |
| 0.2 | kg/m | Mass of toothed belt | |
| 270 | mm/Umdr | Feed rate(mm/Revolution) | |
| 12.6 x Series 10^-4 | kg x m^2 | Mass moment of inertia of two gears | |
| Dimensions | |||
| B (type)1 | 90 | mm | Tolerance: +/-0,1 |
|---|---|---|---|
| B (type)2 | 80 | mm | - |
| B (type)3 | Series 112 | mm | - |
| D (type) | 115 | mm | - |
| D (type)1 | 95 | mm | Tolerance:G7 |
| D (type)2 | 76 | mm | - |
| H1 | 60.5 | mm | Tolerance: +/-0,Series 5 |
| H2 | 117.7 | mm | - |
| H3 | 25 | mm | - |
| H4 | 50 | mm | - |
| HSeries 5 | 72.Series 8 | mm | - |
| H6 | 65.4 | mm | - |
| L1 | 55 | mm | Tolerance: +/-0,1 |
| L3 | 105 | mm | - |
| L4 | 115.5 | mm | - |
| LSeries 5 | Series 19 | mm | - |
| O | M10 | - | |
| O1 | M8 | - | |
| T (type) | 4 | mm | Tolerance: +0,Series 5 |
| ly | 386 | cm^4 | Moment of inertia |
| lz | 301 | cm^4 | Moment of inertia |
| H | 119 | mm | - |
| B (type) | 130 | mm | - |
| L | 300 | mm | - |
| Weight | |||
| mLaw | 2700 | g | Mass of carriage |
|---|---|---|---|
| Locking torque | |||
| mtot | (Ltot - Series 231) x 0.0128 + Series 10.5 | kg | Note downMaximumLocking torque of |
|---|---|---|---|
| Permissible load | |||
| F (type)y per | 1500 | N (type) | Permissible load of guideway system carriage These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. |
|---|---|---|---|
| F (type)0y per | 2500 | N (type) | Permissible load of guideway system carriage These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. |
| F (type)z per | 3500 | N (type) | Permissible load of guideway system carriage These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. |
| F (type)0z per | 3500 | N (type) | Permissible load of guideway system carriage These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. |
| Permissible torque | |||
| Series Mx per | Series 33 | Nm | Permissible torque of carriage guideway system These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. |
|---|---|---|---|
| Series My per | 245 | Nm | Permissible torque of carriage guideway system These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. |
| Series Mz per | 125 | Nm | Permissible torque of carriage guideway system These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. |
| Permissible static torque | |||
| Series M0x per | 52 | Nm | Permissible torque of carriage guideway system These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. |
|---|---|---|---|
| Series M0y per | 245 | Nm | Permissible torque of carriage guideway system These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. |
| Series M0z per | 210 | Nm | Permissible torque of carriage guideway system These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. |
Related bearings
Company Profile｜Andge Bearing
Andge Bearing is a global provider of specialized bearing products and solutions, dedicated to delivering efficient, flexible, and competitive product and service support to small and medium-sized bearing distributors worldwide.
We deeply understand the challenges SME bearing distributors face in daily operations—complex models, diverse demands, scattered orders, heavy inventory pressure, and high customer customization requirements. Based on this, Andge Bearing is committed to building a customer-centric, problem-solving service system that delivers truly valuable support to our partners.
Our Services
Diversified Product Supply
Covering both standard and non-standard bearing models to meet diverse industry and application needs.
Customized Solutions
Deliver tailored product matching, technical guidance, and customized services aligned with your market positioning and end-user requirements.
Flexible Collaboration Models
Support small-batch, multi-order procurement to reduce inventory and capital burdens.
Expert Support & Responsiveness
Ensure swift communication, clear selection recommendations, and reliable delivery to enhance operational efficiency.
Our Mission
To empower small and medium-sized bearing distributors worldwide by solving practical business challenges, enhancing their market competitiveness, and fostering sustainable growth.
Our Vision
To become the trusted long-term partner for global small and medium-sized bearing distributors, connecting markets worldwide through expertise, flexibility, and integrity.
1: We not only sell these trusted brands, but we can also customize bearing products according to your requirements.
2: Fast delivery is our strength, reaching 90% of global cities within 10 days.
3: We also provide technical support and after-sales service, with our engineers ready to assist you within 24 hours.
4: Payment is convenient and fast. We accept wire transfers, letters of credit, PayPal, Visa, MasterCard, Wise, Stripe, and WorldFirst.
- Hot Brands
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
- Contact Us
