Product Details
Product Details
- INA MDKUE25-3ZR
- Brand: INA
- Type series: Series MDKUE..-3ZR
- Model: MDKUE25-3ZR
- H : 145mm B : 250mm L : 365mm Weight: 14.1Kg
Product parameters
| Dimensions | |||
| H | 145 | mm | - |
|---|---|---|---|
| B (type) | 250 | mm | - |
| L | 365 | mm | - |
| B (type)1 | 35 | mm | Groove width8 mm |
| B (type)2 | 115 | mm | Groove width8 mm |
| B (type)3 | 185 | mm | Groove width8 mm |
| B (type)4 | 50 | mm | For linear actuators MDKU(V)E15-3ZR: Groove width8 mm For linear actuators MDKU(S)E25-3ZR: Groove width10 mm |
| B (type)Series 5 | 110 | mm | For linear actuators MDKU(V)E15-3ZR: Groove width8 mm For linear actuators MDKU(S)E25-3ZR: Groove width10 mm |
| B (type)6 | 210 | mm | For linear actuators MDKU(V)E15-3ZR: Groove width8 mm For linear actuators MDKU(S)E25-3ZR: Groove width10 mm |
| B (type)7 | 260 | mm | - |
| B (type)Series 8 | Series 10 | mm | - |
| D (type) | 115 | mm | - |
| D (type)1 | 95 | mm | Tolerance:G7 |
| D (type)2 | 76 | mm | - |
| H1 | Series 63 | mm | Tolerance: +/-0,Series 5 |
| H2 | 120.5 | mm | - |
| H3 | 25 | mm | Groove width8 mm |
| H4 | 50 | mm | For linear actuators MDKU(V)E15-3ZR: Groove width Series 5 mm For linear actuators MDKU(S)E25-3ZR: Groove width8 mm |
| HSeries 5 | 108 | mm | - |
| L1 | 405 | mm | - |
| L4 | 115.5 | mm | - |
| O | M8 | - | |
| T (type) | 4 | mm | Tolerance: +0,Series 5 |
| ly | 7069 | cm^4 | Moment of inertia |
| lz | 899 | cm^4 | Moment of inertia |
| Description | |||
| 21) | Groove width Series 10 | ||
|---|---|---|---|
| Series 22) | Groove width Series 8 | ||
| 50AT10 | Toothed belt | ||
| 5640 | N (type) | Permissible working load of toothed belt | |
| 207 | Nm | MaximumDriving torque | |
| Series 230 | mm/Umdr | Feed rate(mm/Revolution) | |
| 35.2 x Series 10^-4 | kg x m^2 | Mass moment of inertia of two gears | |
| L2 = Total stroke + L1 + Series 12 L tot = Total stroke + L1 + Series 12 x L4 Total stroke= Effective stroke + 2 x S Attention: S Refers to safety margin suitable for special applications, Should be at least85 mm; Total stroke unit ismm. MaximumSingle support rail length L2 = 6000 mm. | |||
| Weight | |||
| mLaw | 14100 | g | Mass of carriage |
|---|---|---|---|
| mtot | (Ltot - Series 231) x 0.0325 + 30 | kg | Mass |
| Basic rated load | |||
| C (type)I | 42700 | N (type) | Basic rated load: Attention: This value only applies to Lh Calculation of life. |
|---|---|---|---|
| C (type)0 I | 83600 | N (type) | Basic rated load: Attention: This value only applies to Lh Calculation of life. |
| C (type)II | 42700 | N (type) | Basic rated load: Attention: This value only applies to Lh Calculation of life. |
| C (type)0 II | 83600 | N (type) | Basic rated load: Attention: This value only applies to Lh Calculation of life. |
| C (type)III | 42700 | N (type) | Basic rated load: Attention: This value only applies to Lh Calculation of life. |
| C (type)0 III | 83600 | N (type) | Basic rated load: Attention: This value only applies to Lh Calculation of life. |
| Permissible static torque | |||
| Series M0x | 5500 | Nm | Permissible static torque of linear guideway system These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. Design standards regarding guideway systems, SeePF1Catalog. |
|---|---|---|---|
| Series M0y | 5300 | Nm | Permissible static torque of linear guideway system These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. Design standards regarding guideway systems, SeePF1Catalog. |
| Series M0z | 5400 | Nm | Permissible static torque of linear guideway system These values are single loads, Used when the lower part of the actuator is fully supported. When subjected to combined loads, These values must be reduced. Design standards regarding guideway systems, SeePF1Catalog. |
Related bearings
Company Profile｜Andge Bearing
Andge Bearing is a global provider of specialized bearing products and solutions, dedicated to delivering efficient, flexible, and competitive product and service support to small and medium-sized bearing distributors worldwide.
We deeply understand the challenges SME bearing distributors face in daily operations—complex models, diverse demands, scattered orders, heavy inventory pressure, and high customer customization requirements. Based on this, Andge Bearing is committed to building a customer-centric, problem-solving service system that delivers truly valuable support to our partners.
Our Services
Diversified Product Supply
Covering both standard and non-standard bearing models to meet diverse industry and application needs.
Customized Solutions
Deliver tailored product matching, technical guidance, and customized services aligned with your market positioning and end-user requirements.
Flexible Collaboration Models
Support small-batch, multi-order procurement to reduce inventory and capital burdens.
Expert Support & Responsiveness
Ensure swift communication, clear selection recommendations, and reliable delivery to enhance operational efficiency.
Our Mission
To empower small and medium-sized bearing distributors worldwide by solving practical business challenges, enhancing their market competitiveness, and fostering sustainable growth.
Our Vision
To become the trusted long-term partner for global small and medium-sized bearing distributors, connecting markets worldwide through expertise, flexibility, and integrity.
1: We not only sell these trusted brands, but we can also customize bearing products according to your requirements.
2: Fast delivery is our strength, reaching 90% of global cities within 10 days.
3: We also provide technical support and after-sales service, with our engineers ready to assist you within 24 hours.
4: Payment is convenient and fast. We accept wire transfers, letters of credit, PayPal, Visa, MasterCard, Wise, Stripe, and WorldFirst.
- Hot Brands
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
- Contact Us
