Product Details
Product Details
- INA MKLF32086-ZR
- Brand:INA
- Type series:MKLF..-ZR
- Model:MKLF32086-ZR
- H : 82mm B : 86mm L : 155mm Weight:1.2Kg
Product parameters
| Dimensions | |||
| H6 | 47 | mm | - |
|---|---|---|---|
| L1 | 50 | mm | Tolerance: +/-0,1 |
| L4 | 80 | mm | - |
| L5 | 14 | mm | - |
| L6 | 102 | mm | - |
| L7 | 80 | mm | - |
| O | M8 | - | |
| O1 | M6 | - | |
| T | 2.3 | mm | Tolerance: +0,2 |
| ly | 102 | cm^4 | Support railofTorque(at the open end) |
| lz | 65 | cm^4 | Support railofTorque(at the open end) |
| H | 82 | mm | - |
| B | 86 | mm | - |
| L | 155 | mm | - |
| B1 | 59 | mm | Tolerance: +/-0,1 |
| B2 | 43 | mm | - |
| B3 | 75 | mm | - |
| B4 | 94 | mm | - |
| D | 80 | mm | - |
| D1 | 70 | mm | Tolerance:G7 |
| D2 | 61 | mm | - |
| H1 | 41.5 | mm | Tolerance: +/-0,5 |
| H2 | 81.3 | mm | - |
| H3 | 25 | mm | - |
| H5 | 50 | mm | - |
| Weight | |||
| mtot | (Ltot - 160) x 0.0060 + 5.1 | kg | Quality |
|---|---|---|---|
| mLaw | 800 | g | sliderofQuality |
| mLaw | 1200 | g | WithofsliderofQuality |
| Allowable payload | |||
| Fy per | 850 | N | sliderGuide railAllowable load of the system These values are for single loads,Applies to a single slider.When subjected to combined loads,These values must be reduced. |
|---|---|---|---|
| F0y per | 1400 | N | sliderGuide railAllowable load of the system These values are for single loads,Applies to a single slider.When subjected to combined loads,These values must be reduced. |
| Fz per | 1000 | N | sliderGuide railAllowable load of the system These values are for single loads,Applies to a single slider.When subjected to combined loads,These values must be reduced. |
| F0z per | 1000 | N | sliderGuide railAllowable load of the system These values are for single loads,Applies to a single slider.When subjected to combined loads,These values must be reduced. |
| Allowable torque | |||
| Mx per | 11 | Nm | sliderGuide railofAllowable torque These values are for single loads,Applies to a single slider.When subjected to combined loads,These values must be reduced. |
|---|---|---|---|
| M0x per | 18 | Nm | sliderGuide railofAllowable torque These values are for single loads,Applies to a single slider.When subjected to combined loads,These values must be reduced. |
| My per | 30 | Nm | sliderGuide railofAllowable torque These values are for single loads,Applies to a single slider.When subjected to combined loads,These values must be reduced. |
| M0y per | 30 | Nm | sliderGuide railofAllowable torque These values are for single loads,Applies to a single slider.When subjected to combined loads,These values must be reduced. |
| Mz per | 26 | Nm | sliderGuide railofAllowable torque These values are for single loads,Applies to a single slider.When subjected to combined loads,These values must be reduced. |
| M0z per | 43 | Nm | sliderGuide railofAllowable torque These values are for single loads,Applies to a single slider.When subjected to combined loads,These values must be reduced. |
| Description | |||
| 20 AT 5 | Tooth shapeWith | ||
| Series 640 | N | Tooth shapeWithof | |
| 18 | Nm | MaximumdriveDynamicTorque | |
| 0.068 | kg/m | Tooth shapeWithofQuality | |
| 175 | mm/Umdr | Feed amount(mm/change) | |
| 2.2 x 10^-4 | kg x m^2 | ofQualitymoment of inertia | |
| L2 = total trip + 2 x L + 12 + Lmin L tot = total trip + 2 x L + 2 x L4 + 12 + Lmin total trip ＝ 2 Valid itinerary+ 2 x S (Valid itinerary/sliderUnit: mm) Notice:AllowanceSrefers to a safe range,should be at least85 mm. MaximumSupport railLength L2 = 8000 mm. | |||
| 1) | according toDIN 3 405 ofLubricationMouth | ||
| 5) | sliderofMinimumdistance Lmin Depends on application conditions,should be at least20 mm. | ||
| 6) | Support railofLengthof | ||
Related bearings
Company Profile｜Andge Bearing
Andge Bearing is a global provider of specialized bearing products and solutions, dedicated to delivering efficient, flexible, and competitive product and service support to small and medium-sized bearing distributors worldwide.
We deeply understand the challenges SME bearing distributors face in daily operations—complex models, diverse demands, scattered orders, heavy inventory pressure, and high customer customization requirements. Based on this, Andge Bearing is committed to building a customer-centric, problem-solving service system that delivers truly valuable support to our partners.
Our Services
Diversified Product Supply
Covering both standard and non-standard bearing models to meet diverse industry and application needs.
Customized Solutions
Deliver tailored product matching, technical guidance, and customized services aligned with your market positioning and end-user requirements.
Flexible Collaboration Models
Support small-batch, multi-order procurement to reduce inventory and capital burdens.
Expert Support & Responsiveness
Ensure swift communication, clear selection recommendations, and reliable delivery to enhance operational efficiency.
Our Mission
To empower small and medium-sized bearing distributors worldwide by solving practical business challenges, enhancing their market competitiveness, and fostering sustainable growth.
Our Vision
To become the trusted long-term partner for global small and medium-sized bearing distributors, connecting markets worldwide through expertise, flexibility, and integrity.
1: We not only sell these trusted brands, but we can also customize bearing products according to your requirements.
2: Fast delivery is our strength, reaching 90% of global cities within 10 days.
3: We also provide technical support and after-sales service, with our engineers ready to assist you within 24 hours.
4: Payment is convenient and fast. We accept wire transfers, letters of credit, PayPal, Visa, MasterCard, Wise, Stripe, and WorldFirst.
- Hot Brands
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
-
|
- Contact Us
